Ok i have a 89 s5 with a turbo engine. and im having trouble with the engine flooding. i even changed my plugs. i followed the steps in this article i get to the part when the engine smokes when starting cuz of the ATF it idles just fine for about 50 secs. Then it starts to putter and then dies, when i try to start it again it cranks but it does not start again. not until i do the everything again i will start for 50 seconds and it dies. i want to check the injectors to see if there leaking. i did a compression test and it has good compression. thnx!

this is were i got my info on unflooding the engine.
http://www.rx7.com/tech/unflood-fc.html

 

i also hear of putting a kill switch for the fuel pump but i dont even know if that works. do any of you guys have put that on your fc's?

 

ok so i check the prc valves and move them around and the car starts now hell yeaH! i just need to verify with someone that has a turbo fc. this is how i put them starting closest to the firewall its blue than in the middle is orange; and white closest to the front of the engine. can anyone verify this on thier fc.

 

ok so i got the correct config its , starting from the fire wall blue, orange in the middle, and gray on the end closest to the bumper is gray i got it of this link hope it helps some of you guys out, witch did help me but its all good!