rwdburnout

my 87 N/A rx7 stalls out when i stop with my A/C on anyone know why

MattB

BAC valve is clogged or not working...

sleejay

bac valve. test it, and clean it. replace if necessary.

91mazdarx7

sorry for cutting in on your thread but how would you go about testing and cleaning the BAC carb cleaner would be good to clean it with right? im having almost the same problem but i just get a jumping idle from almost stalling then it shoots up to 1,800 RPM

sleejay

search/fsm.
best 2 options i can think of

My5ABaby

iTrader: (7)

Those 2 options will get you 99.99% of the answers you could possibly want.

ericgrau

iTrader: (1)

Temporary solution: turn off A/C before every time you idle. Obviously not good long-term.

rwdburnout

i have tryed to turn the A/C off at stops and it still stall out

AlexG13B

iTrader: (7)

I need to do the same to mine. Can we reuse the gasket?
Also the previous owner screwed up the connector on the harness, so can someone tell me what color wire goes where?

2713ddddavid

iTrader: (1)

.......either wire to either terminal works fine.

monkhommey

and i thought i was the only one who had that problem... i thought it was because my car doesnt have very much torque at 750rpm.. hell when i turn my headlights,foglights on and hit the brakes it almost kills it too..

socalrotor

iTrader: (1)

you also might check the ac compressor to make sure it turns freely.

rotary_gx7

i had the same problem i thaught it was the alternator or something, went almost all of last summer using the e-brake at stoplights, holding the clutch and revving up to stop it from stalling.. everyone thaught i wanted to race lol. It just sort of went away after winter, havent a problem this summer (knock on wood).

AlexG13B

iTrader: (7)

yea happens to me too..on my turbo timer the charging starts to drop like flies lol

rwdburnout

i does it on both of my rx7s there both 87s one of them has a street port and the emission **** has been takein off and the other one is all stock

sar

iTrader: (1)

if you cleaned your bac and just don't ac at idle... wire in a relay to break the ac switch when the clutch is in.