2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

stalled now wont start.

Thread Tools
 
Search this Thread
 
Old Apr 17, 2004 | 03:43 PM
  #1  
Dom_C's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Feb 2004
Posts: 1,225
Likes: 0
From: Freeport, Maine
Red face stalled now wont start.

ok was out side today working on the 86 NA i had the front jacked up a little so i could tighten the exhaust a bit. but anyways i started the car and then was down next to it listningt for the exhaust leak and the car died. It had been idlling for about 4 or 5 minutes. I didn't not touch the gas the whole time. I started it and it went up to like 2 grand then fell to about 750 -1000 like normal. then she just died. like it was flooded almost. I tryed to start it again and she would crank and fire a little but woulnd't start. BLAHH i just go tthe thing running a week ago. so i pulled the plugs and the leading plugs were dry but they were burnt pretty bad i guess. then i pulled the fuses and turned her over a few times to unflood and alot of gas and junk came out so i put the plugs back in and then i took out the trailing plugs they were soaked and looked about the same. ( a black brown combination) i put the plugs back in and tryed to start. Got pretty much the same response. she would turn over and catch once or twice but not even as much as before. What is wrong with this thing! please help
Dom
Reply
Old Apr 17, 2004 | 03:56 PM
  #2  
Dom_C's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Feb 2004
Posts: 1,225
Likes: 0
From: Freeport, Maine
bump
Reply
Old Apr 17, 2004 | 06:07 PM
  #3  
Dom_C's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Feb 2004
Posts: 1,225
Likes: 0
From: Freeport, Maine
bumpity bump bump bump
come on guys this is one of the biggest forums out there. someone must have some ideas. can my car just flood while running like that? it was idling fine. a bit of help would be great. thanks
Reply
Old Apr 18, 2004 | 02:40 PM
  #4  
Dom_C's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Feb 2004
Posts: 1,225
Likes: 0
From: Freeport, Maine
bump
Reply
Old Apr 18, 2004 | 03:01 PM
  #5  
RXciting's Avatar
GrapefruitRacing?
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 2,155
Likes: 0
From: PartSource
ok well if it was flooded and and your plugs are pretty disgusting the unflood it change the plugs and try starting it..
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Einheri
Single Turbo RX-7's
14
Oct 7, 2015 12:23 PM
loganneet
General Rotary Tech Support
8
Oct 3, 2015 07:51 PM
xXBrendanXx
Power FC Forum
6
Sep 17, 2015 10:10 AM
sinistersam
New Member RX-7 Technical
5
Sep 13, 2015 07:17 PM
JGLawson
General Rotary Tech Support
4
Sep 13, 2015 03:23 PM




All times are GMT -5. The time now is 03:17 AM.