this sounds stupid but
#3
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
First Disconnect your Battery!
The Fuse is Bolted IN and ON to the fuse block,one bolt on each side of the fuse block(engine bay)
Now,Look at the sides of the fuse Block..there are plastic Flaps on each side.Put a flathead screwdriver in there and Move the flaps out..
You will Now SEE 2 -10mm Bolts that attach the Fuse to the Fuse block.,Undo those 2 bolts and you can Pull the Fuse UP and OUT of the Block.
Those Bolts were put in so the Main Fuse(being a fuse for EVERYTHING) won't Pop out on ya and shut your Car down while you are Driving!!!(sort of a precautionary Feature!)
The Fuse is Bolted IN and ON to the fuse block,one bolt on each side of the fuse block(engine bay)
Now,Look at the sides of the fuse Block..there are plastic Flaps on each side.Put a flathead screwdriver in there and Move the flaps out..
You will Now SEE 2 -10mm Bolts that attach the Fuse to the Fuse block.,Undo those 2 bolts and you can Pull the Fuse UP and OUT of the Block.
Those Bolts were put in so the Main Fuse(being a fuse for EVERYTHING) won't Pop out on ya and shut your Car down while you are Driving!!!(sort of a precautionary Feature!)
Thread
Thread Starter
Forum
Replies
Last Post