2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Some things I tried and the GREAT results!!

Thread Tools
 
Search this Thread
 
Old 03-06-04, 02:21 PM
  #1  
Is that thing Turbo?

Thread Starter
 
totallimmortal's Avatar
 
Join Date: Jan 2004
Location: Maryland
Posts: 1,411
Likes: 0
Received 0 Likes on 0 Posts
Some things I tried and the GREAT results!!

OK i bought a 86 s4 NA in august of 03, i took it to the track and couldn't do any better than a 16.3, so this winter I wanted to work on my car make it better, It alread had RB cat back and dual bonez high flow cats, I replaced the cats with 3 inch straigt pipe,and added an intake. Next i hooked up my 5th and 6th port actuators to my air pump, and use AMSOIL POWER FOAM, i did all this at once pretty much but i know for a fact the power foam made a huge diff. anyway after doing all this my car idles, runs, sounds and pulls better than i ever thought it could and I ran a 15.2 on bald tires!!! just some ideas that i know work
Old 03-06-04, 02:22 PM
  #2  
88 AE

 
BDoty311's Avatar
 
Join Date: Mar 2002
Location: N/A
Posts: 2,865
Likes: 0
Received 0 Likes on 0 Posts
Whats power foam?
Old 03-06-04, 02:33 PM
  #3  
Full Member

 
Gotenks's Avatar
 
Join Date: Sep 2003
Location: Las Vegas, Nevada
Posts: 104
Likes: 0
Received 0 Likes on 0 Posts
Dang, can you do a write up and maybe some pictures of the parts and assembly for the air pump actuator set up!

Thanks man
Old 03-06-04, 03:01 PM
  #4  
Is that thing Turbo?

Thread Starter
 
totallimmortal's Avatar
 
Join Date: Jan 2004
Location: Maryland
Posts: 1,411
Likes: 0
Received 0 Likes on 0 Posts
Power Foam is a product made by Amsoil, it,s made to clean the internal parts of an engine, its a white foam you spray the whole can into the intake while the engine is running, works on the same principal as the ATF and water trick only it works much better and can't harm your engine, and the air pump actuator i just took off the tube from the air pump, drilled a hole in it and stuck a vacuum hos in the hole and sealed it up with caulk, put the air pump tube back on and hook up the vacuum hose to the actuators, now they open around 3000 rmp maybe a little early for some but better than being closed
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
C. Ludwig
Single Turbo RX-7's
49
01-30-19 06:31 AM
rxmiles
3rd Generation Specific (1993-2002)
9
08-24-15 02:07 PM



Quick Reply: Some things I tried and the GREAT results!!



All times are GMT -5. The time now is 10:27 AM.