I just rebuilt my motor now I think my oil pressure sensor is bad for one because im reading 110 psi soon as I kick the key forward thats fine I guess I will fix that but my main concern is for some reason my oil is leaking out of the top of my dipstick tube. I think I have a sneaking suspision why this is going on just not to sure. There are these 2 vac tubes on the filler tube one is at the bottom on the block itself the other is at the top of the tube it self I could not find anything in the FSM except for they used to be connected to the rats nest I no longer have. I just plugged them for now but I dont think that gonna work let me know what you guys think.

 

I think you need to get an aftermarket mechanical gauge to check and see if the sender is in error or not, but if oil is leaking out the dipstick I would expect that your gauge is correct and that you have a oil passage clogged or a failed pressure regulator.

The two vac lines that you mention are for the PCV valve.

And your bump has been deleted. Bumps are forbidden here in the 2nd gen RX-7 technical section