some input on MSD DIS ignitions
#1
Flinstone Power
Thread Starter
Join Date: Nov 2001
Location: Cleveland, Ohio
Posts: 853
Likes: 0
Received 0 Likes
on
0 Posts
some input on MSD DIS ignitions
Well i know that the DIS 2 channel will work for the leading side but will hte DIS 4channel work for everything? it says it can handle 3-4 coil packs, and our cars have 3 so could it happen? If not why? anyone have any experience with this ignition? thanks
Dave
Dave
#2
Former Moderator. RIP Icemark.
a MSD DIS2 would be for the trailing coils (if you wanted to waste the money).
On the leading coil it would even be more of a waste since you would only be able to use half of the DIS2.
I suppose you could use a DIS 4 for all three coils, but IMO any sort of amp for the trailing coils is a waste on time and money and will not produce any additional HP or gas mileage.
On the leading coil it would even be more of a waste since you would only be able to use half of the DIS2.
I suppose you could use a DIS 4 for all three coils, but IMO any sort of amp for the trailing coils is a waste on time and money and will not produce any additional HP or gas mileage.
#3
Lives on the Forum
Originally Posted by DJChunter
Well i know that the DIS 2 channel will work for the leading side but will hte DIS 4channel work for everything? it says it can handle 3-4 coil packs, and our cars have 3 so could it happen? If not why? anyone have any experience with this ignition?
Who told you the DIS-2 would work for the leading?
Try and search under my nick and DIS2 or DIS-2 - I have refuted almost every single thread asking if it'll work on the leading.
As for the DIS-4 controlling all 3 channels - NO.
We tried it on an FD, and it doesn't work.
The DIS-4 is a multiplexer box, and it needs to see (up to) 4 sequential, evenly spaced ignition input signals to work correctly.
Since the FC (and FD) ignition signals are not like this, the DIS-4 barfs.
-Ted
#4
Flinstone Power
Thread Starter
Join Date: Nov 2001
Location: Cleveland, Ohio
Posts: 853
Likes: 0
Received 0 Likes
on
0 Posts
it was in a post i read about 2 years ago when i was building my first car someone asked about it and said it would work.. ok.. thanks for the input..
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM