Slowly but surely
#27
Full Member
Thread Starter
Join Date: Nov 2012
Location: alberta
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
so I finally ordered the Rtek 2.1 and will be throwing the engine back together starting next week. iv decided to wait to build the intake manifold and just keep the old ones for now. I wanna have it up and running by summer time. I will be making a stainless cold air intake tho.
#28
rotory chicken
Join Date: Mar 2011
Location: midwest
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Umm block off bolts or extra injectors also if you are not going for larger fuel system why take out omp in my opinion put it back in and premix you are covered extra that way especially since it looks like you want to race it
#29
Full Member
Thread Starter
Join Date: Nov 2012
Location: alberta
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Keeping the stock fuel set up. Im not going to be racing it, just my weekend driver. With the Rtek 2.1 ill be able to tune my fuel to
And the omp will not be going back on. Those lines are horrible and the electric omp i just dont trust.
And the omp will not be going back on. Those lines are horrible and the electric omp i just dont trust.
#30
Full Member
Thread Starter
Join Date: Nov 2012
Location: alberta
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
#31
Full Member
Thread Starter
Join Date: Nov 2012
Location: alberta
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
#32
Full Member
Thread Starter
Join Date: Nov 2012
Location: alberta
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
finally got my FC running after two years of tinkering around and she runs great. installed the RTEK 2.1 and put a new battery in. I changed the fuel filter and sock. Took it for a rip down the block.
I recently put new RB sway bars and now when the suspension travels the sway bar hits the frame. Would short end links fix that? Has anyone had this before?
I recently put new RB sway bars and now when the suspension travels the sway bar hits the frame. Would short end links fix that? Has anyone had this before?
#35
Full Member
Thread Starter
Join Date: Nov 2012
Location: alberta
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Recently ripped the exhaust off the car and started making the exhaust. Also had all the intake manifolds ceramic coated
Attachment 543601
Attachment 543602
Attachment 543601
Attachment 543602
#39
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
I'm still trying to figure out if you want to be called "slowly" or Shirley!..(heh,heh!)
Good job on the car man..keep up the great work!
Good job on the car man..keep up the great work!
#42
Full Member
Thread Starter
Join Date: Nov 2012
Location: alberta
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Ended up dropping the rear sub frame on saturday. Wanted to install the toe eliminator bushings but one thing lead to another and we got carried away. Plan now is to change all the bushings in the car with poly eurathane ones from j auto, new drilled and slotted brakes, agx adjustable shocks with our tein springs, a grand total of 1600 $$ later and it should be back together haha
The whole sub frame will be torn apart, sandblasted and painted. I will also be repairing some more rust with detailed picture of the uni body repair.
The whole sub frame will be torn apart, sandblasted and painted. I will also be repairing some more rust with detailed picture of the uni body repair.
#44
Full Member
Thread Starter
Join Date: Nov 2012
Location: alberta
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Haha thanks man. If you need any custom work im more than willing to work with you to do some fab work. Wheather is custom fuel cell or an intake or anything else
#50
Full Member
Thread Starter
Join Date: Nov 2012
Location: alberta
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
After a long time comin i have finally got my stainless exhaust manifold all tacked up. It came out beauty and im very pleased. Curious to what it will sound like