will a s4 turbo manifold bolt to an na s4 block?

yes i searched.

 

Intake manifold? no.

Turbo=4port.

NA=6port.

 

i said turbo manifold.

 

Then yes, with a spacer.

So the turbo clears the NA LIM.

 

no. sigh. im going to slap a turbo intake manifold on there
and a turbo everything else. dont ask me how i will rout lines and ****. i just want to know if the bolt pattern on the exhaust manifold from an s4 na to a s4 turbo is the same.

 

Good luck with that.

 

The exhaust manifold from a turbo will work on an NA.

 

i know thy are different ports. ive seen other people bolt em up fine and port matching. my question is this. will it bolt up. is the bolt pattern the same?

also will the stock exhaust manifold from a turbo s4 bolt into a stock turbo s4 block. no spacers.

 

yes the bolt patterns are the same for both the intake and exhaust, there is an added center bolt threaded into the middle iron for the turbo intakes which can easily be drilled and tapped with some care.

 

thank you.

 

You can also compare the gasket pictures on mazdatrix:
http://mazdatrix.com/c-2.htm

 

its been done.
had a buddy of mine put on a S4 intake manifold to N/A block with some porting,
and put on S4 turbo manifold, straight bolt on