shortshift kits
Yes, that is my car
Joined: Oct 2002
Posts: 653
Likes: 0
From: New Orleans La.
I guess that the peice has to fit inside of the main bolt down part, and be level with it at the bottom right? I was told that it just has to help hold the factory bushing in place. I think I willl try to make it from a peice of PVC pipe, do you see any problems with that? I can`t imagine it will get hot enough to melt the pipe and from what I understand there is actually no force on it from the shift stick to wear it out.
Or am I wrong? BTW, I think $150 shipped is a good price for a new hand made shifter kit.
John
Or am I wrong? BTW, I think $150 shipped is a good price for a new hand made shifter kit.
John
Thread Starter
Joined: Feb 2001
Posts: 4,988
Likes: 18
From: Czech Republic [www.rx7cz.net]
i am not sure pvc will be best choice, but u will not find if u`ll not try it 
some our transmissions are getting warm enought to deform (not melt, but make it soft) PVC....but there are other types of plastic pipes used for hot water piping in house which could work...
even u`ll get it working, i would not suggest to keep it plastic.....once u will be sure about dimensions, get some steel or alu one.....it will not worn....
part u are missing is holding bushing AND its lenght depends on lenght of lower part of shifter...
(ID is same like bushings ID, OD have to fit into bigger ring)
my kits are not HAND made but CNC machined
some our transmissions are getting warm enought to deform (not melt, but make it soft) PVC....but there are other types of plastic pipes used for hot water piping in house which could work...even u`ll get it working, i would not suggest to keep it plastic.....once u will be sure about dimensions, get some steel or alu one.....it will not worn....
part u are missing is holding bushing AND its lenght depends on lenght of lower part of shifter...
(ID is same like bushings ID, OD have to fit into bigger ring)
my kits are not HAND made but CNC machined
Junior Member
Joined: Apr 2001
Posts: 21
Likes: 0
From: LA LA LA
Originally posted by bingoboy
anyone know which factory ***** that will fit if any?
anyone know which factory ***** that will fit if any?
If people want OEM 1st gen Miata *****, I'm sure I can find a way to get a bunch. They're pistol-grip shaped and weighed on top. Much better than the OEM S4 crap.
Last edited by TonyC; Jan 22, 2003 at 08:47 AM.
Thread Starter
Joined: Feb 2001
Posts: 4,988
Likes: 18
From: Czech Republic [www.rx7cz.net]
Originally posted by Phu5ion
Got my shortshifter today. Looks great, hIGGI, thanks.
Might want to think about using FedEX for shipping tho, it took a little to long getting here.
Got my shortshifter today. Looks great, hIGGI, thanks.
Might want to think about using FedEX for shipping tho, it took a little to long getting here.
Pulleys and stuff usually takes only about week or 10 days to get to USA by air mail..
Maybe Big George was testing shifter if its not saddam's secret weapon ;o)))
Senior Member
Joined: Aug 2002
Posts: 311
Likes: 0
From: Parkersburg, West Virginia
I just read all five pages as well...seems like a good thing to me. Unfortunately as someone mentioned before, I'm not currently in good enough standings on my financial matters to buy anything like this (engine rebuild comes first).
Da Monee Pit
Joined: Dec 2001
Posts: 843
Likes: 0
From: Littlefield, Texas
Originally posted by hIGGI
mine will be $150, no more....
knight:
currently i do have first 13 kits but they are for me and my friends here in Europe, i could have another 50 kits in week or two, then about one week to get them to USA if there will be demand high enough to make them...
mine will be $150, no more....
knight:
currently i do have first 13 kits but they are for me and my friends here in Europe, i could have another 50 kits in week or two, then about one week to get them to USA if there will be demand high enough to make them...
Heya Higgi, I'm interested in a short shifter and am ready to buy.
PM me when you have one ready to sell.
Last edited by West TX RX-7; Mar 14, 2003 at 09:49 AM.
I'll have a Coke!
Joined: Jul 2001
Posts: 565
Likes: 6
From: Golden, CO
Originally posted by hIGGI
i have no problem to ship fedex, but it will be around $60 more (what i don`t consider cost effective)
Pulleys and stuff usually takes only about week or 10 days to get to USA by air mail..
Maybe Big George was testing shifter if its not saddam's secret weapon ;o)))
i have no problem to ship fedex, but it will be around $60 more (what i don`t consider cost effective)
Pulleys and stuff usually takes only about week or 10 days to get to USA by air mail..
Maybe Big George was testing shifter if its not saddam's secret weapon ;o)))
How the hell can they give me a delivery attempt slip that says FINAL NOTICE when i never got the first notice?
Quite an organization they run over there; god damn, lazy, good for nothing, sons of bitches, <profanity>, <profanity>, etc.
Full Member
Joined: Dec 2002
Posts: 148
Likes: 0
From: seven heaven
hey inerested in buying one too.
have you implemented the two-piece design, to eliminate the rattle yet?
and what about that rubber bit to deaden outside noise.
is it included or not?
and same price shipped to australia?
have you implemented the two-piece design, to eliminate the rattle yet?
and what about that rubber bit to deaden outside noise.
is it included or not?
and same price shipped to australia?
Thread Starter
Joined: Feb 2001
Posts: 4,988
Likes: 18
From: Czech Republic [www.rx7cz.net]
same price shipped worldwide
no 2-piece design implemented
included is only pin, inner and outside ring and shifter...everything else is used from stock setup....
if u are interested, email me at higgi@rx7cz.net
thanks
no 2-piece design implemented
included is only pin, inner and outside ring and shifter...everything else is used from stock setup....
if u are interested, email me at higgi@rx7cz.net
thanks