Shift knobs: whatcha got?
#76
Rotory POWA!!!
Join Date: May 2005
Location: San Antonio, TX
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by truespin88
I run the stock ****, I dunno I just love it.
I have a custom boot that I hand made from a pair of camouflage pants.
I have a custom boot that I hand made from a pair of camouflage pants.
#78
...
iTrader: (5)
Join Date: Dec 2004
Location: Anchorage, Alaska
Posts: 506
Likes: 0
Received 0 Likes
on
0 Posts
My Momo ****'s set screws kept loosening up & it would turn on the stick.
So, I just made it a thread on unit.
just get nut that has the right threads and an outer diameter that's close to the inner diameter of the Momo ****..
Dremel down the corners of the nut untill its a tight fit,
then press the nut into the shift ****.
Tighten the allen set screws to hold the nut inplace, then thread it on & see where it stops turning when tightened.
you may have to loosen the setscrews & let the nut turn inside the **** untill stops straight, then re-tighten the set screws.
So, I just made it a thread on unit.
just get nut that has the right threads and an outer diameter that's close to the inner diameter of the Momo ****..
Dremel down the corners of the nut untill its a tight fit,
then press the nut into the shift ****.
Tighten the allen set screws to hold the nut inplace, then thread it on & see where it stops turning when tightened.
you may have to loosen the setscrews & let the nut turn inside the **** untill stops straight, then re-tighten the set screws.
Last edited by 13angryB's; 03-23-06 at 03:06 PM.
#80
RIP Icemark
iTrader: (4)
Originally Posted by snowball
i use a shitty no name ****, it doesnt fit to well so i wraped the plastic threaded part with a bunch of tape then forced the **** to fit. doesn't rattle any more.
ROFL, i did the same **** with this crappy APC **** i had for a minute, it still rattled on the very top so i threw it out the window when i was in traffic, it was really ******* annoying
#82
Saiga-12 Power!
iTrader: (4)
Join Date: Oct 2004
Location: N of Chicago
Posts: 4,384
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by djmtsu
I got my RX-8 5spd shift **** from Rotary Performance for $90. meh.
I'm running a stock s5 ****. Its a bit banged up, kinda looks like someone got hungry and tried to eat it at one time. I want a 5spd light up rx8 **** though. If anyone has one or knows where I can get one please PM me!
#85
Boost in..Apex seals out.
Join Date: Nov 2003
Location: Maryland, 21794
Posts: 1,931
Likes: 0
Received 0 Likes
on
0 Posts
I actually just recieved my Mazdaspeed Leather **** in the mail today. Mad sex
AND! I didn't know, but it's WEIGHTED! Woo! It's at least 2x, maybe even 3x as heavy as my stock ****.
AND! I didn't know, but it's WEIGHTED! Woo! It's at least 2x, maybe even 3x as heavy as my stock ****.
Thread
Thread Starter
Forum
Replies
Last Post
distr0
Canadian Forum
3
10-07-15 08:17 AM