Safc I arrow button issues
#1
Senior Member
Thread Starter
Join Date: May 2006
Location: Northern california
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Safc I arrow button issues
view this video, its hard to explain.
Every time i click down to select something the safc clicks back up.
I checked the button by opening the case and is works mechanically fine.
I rechecked an checked my wiring. i followed both http://www.1300cc.com/howto/how2/safc.htm , and the wiring diagram in the manual.
It makes it impossible to adjust any settings, because as soon as you manage to get it to one it automatically increases the setting,.
IS this a known problem or is there a problem with my safc?
car is a 1988 GXL NA cpu 327
Thanks
<param name="movie" value="http://www.viddler.com/player/b6638d69/" /><param name="allowScriptAccess" value="always" /><param name="allowFullScreen" value="true" /><embed src="http://www.viddler.com/player/b6638d69/" wmode="transparent" width="437" height="370" type="application/x-shockwave-flash" allowScriptAccess="always" allowFullScreen="true" name="viddler_Video_Productio_12" /></embed></object>
Every time i click down to select something the safc clicks back up.
I checked the button by opening the case and is works mechanically fine.
I rechecked an checked my wiring. i followed both http://www.1300cc.com/howto/how2/safc.htm , and the wiring diagram in the manual.
It makes it impossible to adjust any settings, because as soon as you manage to get it to one it automatically increases the setting,.
IS this a known problem or is there a problem with my safc?
car is a 1988 GXL NA cpu 327
Thanks
<param name="movie" value="http://www.viddler.com/player/b6638d69/" /><param name="allowScriptAccess" value="always" /><param name="allowFullScreen" value="true" /><embed src="http://www.viddler.com/player/b6638d69/" wmode="transparent" width="437" height="370" type="application/x-shockwave-flash" allowScriptAccess="always" allowFullScreen="true" name="viddler_Video_Productio_12" /></embed></object>
#2
Senior Member
Thread Starter
Join Date: May 2006
Location: Northern california
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
i took it apart, and hooked it up on my bench.
even when i first power it up the highlighted selection goes straight to the top, and i cant select down with the button
Any thoughts?
<param name="movie" value="http://www.viddler.com/player/83458f87/" /><param name="allowScriptAccess" value="always" /><param name="allowFullScreen" value="true" /><embed src="http://www.viddler.com/player/83458f87/" width="437" height="400" type="application/x-shockwave-flash" allowScriptAccess="always" allowFullScreen="true" name="viddler_83458f87"></embed></object>
even when i first power it up the highlighted selection goes straight to the top, and i cant select down with the button
Any thoughts?
<param name="movie" value="http://www.viddler.com/player/83458f87/" /><param name="allowScriptAccess" value="always" /><param name="allowFullScreen" value="true" /><embed src="http://www.viddler.com/player/83458f87/" width="437" height="400" type="application/x-shockwave-flash" allowScriptAccess="always" allowFullScreen="true" name="viddler_83458f87"></embed></object>
#4
Senior Member
Thread Starter
Join Date: May 2006
Location: Northern california
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
explain how. arghx have you seen this issue before?
i can force my way into the menus by clicking down and immediately clicking into settings. everything works if i could get into the right screens.
it just keeps forcing the selection key up. i would guess that if it was a bad part it wouldn't work at all.
also when i first got it hooked up in the car and tried to adjust but couldn't, i just tried to start the car and it started up fine. i didn't drive it though.
Is there anyway to do a hard reboot? like resetting the cmos on a pc? taking out a battery ect?
i can force my way into the menus by clicking down and immediately clicking into settings. everything works if i could get into the right screens.
it just keeps forcing the selection key up. i would guess that if it was a bad part it wouldn't work at all.
also when i first got it hooked up in the car and tried to adjust but couldn't, i just tried to start the car and it started up fine. i didn't drive it though.
Is there anyway to do a hard reboot? like resetting the cmos on a pc? taking out a battery ect?
#5
Senior Member
Thread Starter
Join Date: May 2006
Location: Northern california
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Where can i download the full "INSTRUCTION MANUAL" for the S-AFC 1
not http://www.apexi-usa.com/content/pdf6135.pdf
not http://www.apexi-usa.com/content/pdf6135.pdf
#6
Rotary Freak
Where can i download the full "INSTRUCTION MANUAL" for the S-AFC 1
not http://www.apexi-usa.com/content/pdf6135.pdf
not http://www.apexi-usa.com/content/pdf6135.pdf
What's wrong with those instructions?
I'd say the unit you have is kaput.
Now I've a nice SAFCII I'd let you have for under $100 bucks. Works last time I looked and I'd reinstall it on my car to prove it works prior to sending it.
Thread
Thread Starter
Forum
Replies
Last Post