Hello everyone so Im running a microtech ecu and see no need for my stock harness/ecu in the car, so I removed the harness and removed one orange and one yellow plug that were besides the ecu, apart from the wiper wires and temp sensor wire there isn't anything more to worry about right?
Will my Ac still turn on? thats what Im thinking I already have the idle up function on the MT and the BAC hooked up, but Im kind of worried of my ac compressor not kicking on due to some wire in the stock harness I removed
Thank you and happy holidays!

 

foxed.ca manuals/wiring diagrams is your friend
(since u have harness out, it should take just minutes to check what all u disconnected and what was each wire for)