Can this work? would I have to worry about the ports, sorry guys im a Extreme noob and when i search threads and see all the short hand talk my mind gets scrambled,alot.

It'll be a S5 TII upper and low Intake and would it fit my S5N/A, what mods would I need to do? I plan on a turbo later on and I figured this could help for the future.

 

There is ALOT to moddify. i'll cover just the basics:

1: your 5/6 ports will no longer be finctional
2: the intake will have to be moddified to cover the secondary and 5/6 ports
and we are talking filling in and making HUGE mods to the factory intake.
3: the intakes face opposite directions, not a huge deal but needs to be taken into account

There are other issues, but these are the most prevelant.

IMHO: not worth the trouble

 

Save them for when you actually put the turbo on. The LIM (lower intake manifold) will need to be port matched. Keep on seaching, using the advance search helps me a lot. All the info you need is on here for sure.

 

Porting The 4 Port Turbo II Lower Intake To Fit The 6 Port NA Block

 

Awesome thanks ryan

 

A slightly better option. The airflow will still hit the divider, so it's not perfect either. https://www.rx7club.com/2nd-generati...-block-811607/

Modified TII intake manifolds on an NA would mean power loss down low. It's not something you should do if the engine does not get a turbo.

 

I wouldnt be putting it on until i was adding the Turbo, since its useless to do it until then. I just want to buy it and port match it and have it ready