S4 - TII Gurus - Strange rev issue
#1
My Rear wiper works!
Thread Starter
Join Date: Apr 2004
Location: Ellicott City, MD
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
S4 - TII Gurus - Strange rev issue
We just got the new S4 TII engine with an S5 turbo running
we solved the bouncing idle with a new a TPS
however, we are expirencing a problem where when we get into boost, above 5k the revs will "Stick" at the RPM.
we are really scratching our heads over this one.
Any ideas?
ERIK
we solved the bouncing idle with a new a TPS
however, we are expirencing a problem where when we get into boost, above 5k the revs will "Stick" at the RPM.
we are really scratching our heads over this one.
Any ideas?
ERIK
#2
My Rear wiper works!
Thread Starter
Join Date: Apr 2004
Location: Ellicott City, MD
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
Also having problems with idling.
it is idling around 900 and will drop to 650 and come back up - is this a grounding issue, fuel, tps?
when you first touch the throttle, it seems like it hesitates. It is quite rough, and it will buck.
once you get past part throttle, to maybe half it smoothes out.
Any ideas?
it is idling around 900 and will drop to 650 and come back up - is this a grounding issue, fuel, tps?
when you first touch the throttle, it seems like it hesitates. It is quite rough, and it will buck.
once you get past part throttle, to maybe half it smoothes out.
Any ideas?
#4
"Also having problems with idling.
it is idling around 900 and will drop to 650 and come back up - is this a grounding issue, fuel, tps?"
I had this and it was a vac leak. Slapped some sealant on my blockoff plates and it was done.
it is idling around 900 and will drop to 650 and come back up - is this a grounding issue, fuel, tps?"
I had this and it was a vac leak. Slapped some sealant on my blockoff plates and it was done.
#5
My Rear wiper works!
Thread Starter
Join Date: Apr 2004
Location: Ellicott City, MD
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
I think you were right about the sticking issue, it was prob the throttle cable, seems fine now.
http://rapidshare.de/files/4389685/DSCF0001.AVI.html
here is a video of the idle - there is certainly a hesitation as soon as you touch the throttle, but once you get past the part throttle, it is smooth.
at first in the video, i blip the throttle and it sits at 1.5k for a little by itself, and then goes back to it's "idle" if that is what we shal call it.
We thinking Vac leak still?
http://rapidshare.de/files/4389685/DSCF0001.AVI.html
here is a video of the idle - there is certainly a hesitation as soon as you touch the throttle, but once you get past the part throttle, it is smooth.
at first in the video, i blip the throttle and it sits at 1.5k for a little by itself, and then goes back to it's "idle" if that is what we shal call it.
We thinking Vac leak still?
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 12:42 PM
83revival
New Member RX-7 Technical
4
09-03-15 10:42 PM