S4-S5 intake
#1
Nipples
Thread Starter
Join Date: Mar 2004
Location: San Jose, CA
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
S4-S5 intake
Hey guys. Will parts on an S4 intake manifold matfch up to S5 intake? For instance, LIM from S4 to UIM of S5?
I know the EGR is different etc, but i mean purely the physical matching of the components from each series. I bought gasekt set already (including 25$ gasket for LIM to engine) and decided that I would ilke to get a hold of an S5 intake and port that. I was just wondering if I could save the gaskets.
Thanks again,
Grant
I know the EGR is different etc, but i mean purely the physical matching of the components from each series. I bought gasekt set already (including 25$ gasket for LIM to engine) and decided that I would ilke to get a hold of an S5 intake and port that. I was just wondering if I could save the gaskets.
Thanks again,
Grant
#2
Former Moderator. RIP Icemark.
Non turbo???
On the non turbo: Not without modification and drilling.
And you will need a S4 Lower intake gasket and middle intake gasket.
On the non turbo: Not without modification and drilling.
And you will need a S4 Lower intake gasket and middle intake gasket.