S4 N/A using S5 N/A injectors, ? about jumpering the resistor pack.
Thread Starter
Junior Member
Joined: Jun 2003
Posts: 49
Likes: 0
From: Portland, Oregon
S4 N/A using S5 N/A injectors, ? about jumpering the resistor pack.
I heard you can disconnect the resisor pack and jumper the connector on the harness to work with the High impedance injectors from an S5?
is there a writeup on how to do this?
is there a writeup on how to do this?
I came, I saw, I boosted.
Joined: Apr 2001
Posts: 1,921
Likes: 0
From: Windsor, Ontario, Canada
search
Found this in 10 seconds.
https://www.rx7club.com/showthread.p...=resistor+pack
BTW- you just unplug the resistor pack, and solder/splice all 5 wires together on the car side harness. Toss the box.
Found this in 10 seconds.
https://www.rx7club.com/showthread.p...=resistor+pack
BTW- you just unplug the resistor pack, and solder/splice all 5 wires together on the car side harness. Toss the box.
Last edited by Bambam7; Jan 19, 2004 at 11:30 AM.
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
May 9, 2016 07:06 PM
mulcryant
2nd Generation Specific (1986-1992)
10
Sep 9, 2015 05:24 PM