S4 n/a Fuel Rail Secondary to S5 n/a
Thread Starter
Wish he had a running rx7
Joined: Nov 2006
Posts: 1,180
Likes: 0
From: Oklahoma City
S4 n/a Fuel Rail Secondary to S5 n/a
I needed a S5 n/a Secondary Fuel Rail for my S5 intake of course. The only one that I had was a S4 n/a and I was wondering why it didn't fit to the S5 intake. I found out that the bolt patterns don't match up.
Why I started this is because I turned that fuel rail around and found out that it lines up with the injector holes on the S5 intake. The Fuel Rail also matches up with the bolt pattern on the S5 intake to the lower intake.
The only thing is that you would have to get long enough studs for this though. I also wouldn't know if it would work seeing that the FUEL PRESSURE REGULATOR is on the back of the rail then and the feed line would be at the front.
I'll post pictures tomorrow.
Why I started this is because I turned that fuel rail around and found out that it lines up with the injector holes on the S5 intake. The Fuel Rail also matches up with the bolt pattern on the S5 intake to the lower intake.
The only thing is that you would have to get long enough studs for this though. I also wouldn't know if it would work seeing that the FUEL PRESSURE REGULATOR is on the back of the rail then and the feed line would be at the front.
I'll post pictures tomorrow.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
