Violent Gravy

alright, im prepping my engine to be taken out of my parts car and i've gotten to the rats nest and intake manifold. so im just wondering what other plugs do i need to unplug from the int. besides from the ECU. i've found one and Rotary Rez says that theres 4. im just curious if anyone hase some clear pictures of the remaining plugs in the harness.

oh, and the car is a 87 TII and yes i have searched, thanks guys.

some pic's:

the one i've found

Violent Gravy

bump, i'd hopefully like to get this off today so i can start searching for a engine hoist.

87 t-66

iTrader: (133)

there is also a connector to the knock box above the atmospheric pressure sensor. lay on your back upside down on the seat, stick your head up there and just follow the harness. it should take 2-5 minutes.

arghx

iTrader: (3)

there are two bigass orange looking connectors that connect the front harness to the emissions harness. they can be a pain to disconnect.

Violent Gravy

thanks guys. i'll try to see if i can find the plugs when it stops raining over here. im also in the process of taking the carpet out. since the car came from a junkyard the interior is holding some water, so laying on the floor dusnt sound too fun. so im debating weather or not to cut out the carpet, or try to save it. i know the plugs should be simple to find, i just dont want to prod around with brittle wiring and break something important and not know, ya know? thanks again guys.