2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

S4 88 Car alarm wont arm after battery drained

Thread Tools
 
Search this Thread
 
Old 10-25-21, 08:42 PM
  #1  
Junior Member
Thread Starter
 
CartieTheTranscendent's Avatar
 
Join Date: Dec 2019
Location: California
Posts: 13
Received 0 Likes on 0 Posts
CA S4 88 Car alarm wont arm after battery drained

My battery died cause I left my low beams on after coming home late, and I jumpstarted my car, but the alarm wouldn't arm when I turned off the car and locked my door. I stood outside and turned the door to unlock it to see that the alarm LIGHT was still turning on. Something that might've been affected as well is my dome light. I usually have the switch in the middle, so when I open my doors, the light will come on, but I noticed after the battery drain that it stopped turning on when my doors are open. I doubled checked to see if the dome light was still working by moving the switch all the way to the left, and it works completely fine, with no dimness. What could be the issue with my car alarm and dome light? How would I get them back to functioning how they should be?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cnidus
3rd Gen General Discussion
5
09-07-21 10:54 AM
ngirondo
3rd Generation Specific (1993-2002)
5
12-24-15 09:19 AM
FyVe
3rd Generation Specific (1993-2002)
3
12-28-12 09:17 PM
RX7_Nick
2nd Generation Specific (1986-1992)
8
06-20-08 02:31 AM
FCKing1995
2nd Generation Specific (1986-1992)
6
11-29-06 07:11 AM



Quick Reply: S4 88 Car alarm wont arm after battery drained



All times are GMT -5. The time now is 09:00 PM.