87 mazda rx7 Turbo2 I've jumped wire connector that primes fuel system. But getting no fuel. Does anyone have any tips I can use to solve this issue?

 

Check the fuel pump relay, the wiring to the fuel pump, and the pump itself.
Either the pump is not getting power, or the pump is bad.

Theoretically I suppose a fuel line or the fuel filter could be clogged, but the chance of getting no fuel is pretty low; usually you would just get lower pressure.

 

Fuel pumps of these cars always die

 

Really should explain your problem with a bit of context.

but I’d do as mentioned above. And just wire straight power and ground to the fuel pump connector near the shock tower to get rid of everything in between during testing.

 

I agree with the above. Apply 12V directly to the fuel pump and ensure it works before diagnosing anything in between. I had the same issue on my 10AE and had it diagnosed in 10 minutes. Ordered a fuel pump and installed it and all was well.

 

for what it's worth, he found the issue about 5 days ago: https://www.rx7club.com/new-member-r...store-1150060/