rx7 coil wiring locating help 1988 rx7
Thread Starter
Joined: Aug 2001
Posts: 1,271
Likes: 0
From: Atlanta.Georgia
rx7 coil wiring locating help 1988 rx7
Hey guys i tried to search to pin point the leading/trailing ignition coils location. I purchases a 88rx7 friend someone and they stripped the **** out of the engine bay. well in that process they yanked out the horns and did a wire tuck. the =fuse box is actually sitting close to where the trailing coil would go. He says he didn't cut any wires just pulled it through the body/fender rails to relocate it because he was doing a 1uz swap in it. I got it and just bought a 13bt to keep it rotary. Im running into issues finding the part of the car harness where these plugs are located. i I'm not sure if he taped them up since he wasn't going to use them or Im just getting them mixed up with other connectors. can someone post a pic of what the female connectors look like along with what color wires they are?? I know there are 2 connectors on the trailing and one of the leading coil with the black small plug as well thanks
Leading coil has the two wire plug. One wire is Black/Yellow (comes from Main Relay) and the other is Green/Yellow (runs directly to the ECU). The two wire plug for the trailing coil has two B/Y wires (again,both from the relay) and the other plug houses four wires. They are Blue/Yellow, Brown/Yellow, Blue/Red and Yellow/Blue (first three run directly to the ECU and the Y/L goes to the tach). All wires are part of the front harness.
Last edited by satch; Apr 16, 2013 at 07:00 PM.
Thread
Thread Starter
Forum
Replies
Last Post




