2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Running 50 weight oil in 100' weather

Old Aug 2, 2008 | 02:21 PM
  #1  
cheesebox's Avatar
Thread Starter
Senior Member
Tenured Member: 15 Years
 
Joined: Oct 2006
Posts: 310
Likes: 0
From: NY
Running 50 weight oil in 100' weather

Is it okay? I normally run 20w50 vr1 but ran out and had 5 qts 50 weight vr1 and 1 qt 20w50 vr1, Since its so hot out 50 weight is fine, it will be changed before the weather gets cooler. am I alright running 50 weight?
Reply
Old Aug 2, 2008 | 05:50 PM
  #2  
Black Knight RX7 FC3S's Avatar
Turbo power, activate!
Tenured Member: 20 Years
Liked
Loved
iTrader: (7)
 
Joined: Nov 2002
Posts: 1,708
Likes: 6
From: Philadelphia
Im pretty sure you can mix multiviscosity oil with normal weighted oil as long as the weight are the same, in your case its 50
Reply
Old Aug 2, 2008 | 06:21 PM
  #3  
Evil Aviator's Avatar
Rotorhead
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 9,136
Likes: 39
From: Charlottesville, Virginia, USA
It's difficult to speculate on how that mixture will react, but you can probably consider it straight SAE 50 since so little 20W-50 is in the mixture. I think it will be fine, but were it my car I would be sure to let the engine warm up to operating temperature before putting a load on it since SAE 50 is generally designed more for cold cranking around 120degF. In theory, SAE 50 and 20W-50 would have exactly the same viscocity at 212degF.
Reply
Old Aug 2, 2008 | 06:27 PM
  #4  
Sideways7's Avatar
Lives on the Forum
Tenured Member: 20 Years
Liked
iTrader: (7)
 
Joined: Dec 2003
Posts: 6,598
Likes: 10
From: Temple, Texas (Central)
If it were me, I wouldn't do it. 50w will be fine at operating temperature, but its the start-ups that are worrisome. The worst engine wear already occurs at start-up, and 50w will just increase the amount of time until you get full lubrication to everything. This is obviously less important on a rotary than a piston engine since really the only thing that is lubricated is the rotor bearings on the e-shaft, but it is still important.

How much difference will it really make? Who knows, maybe not that much. But for the price of oil (15 bucks max at Wal-mart) I would just switch it out to avoid possible complications.
Reply
Old Aug 3, 2008 | 09:59 PM
  #5  
tunerguy4life's Avatar
88 rx-7 for drifting
 
Joined: Jul 2008
Posts: 51
Likes: 0
From: luling
i change oil on many cars i also have an rx7 has 123k on the dash and im running 5w30 or 10w30 but its alot hotter where im at in louisiana....where you located and can help you out a lil more than i am now.......
Reply
Old Aug 3, 2008 | 10:03 PM
  #6  
tunerguy4life's Avatar
88 rx-7 for drifting
 
Joined: Jul 2008
Posts: 51
Likes: 0
From: luling
LA

Originally Posted by cheesebox
Is it okay? I normally run 20w50 vr1 but ran out and had 5 qts 50 weight vr1 and 1 qt 20w50 vr1, Since its so hot out 50 weight is fine, it will be changed before the weather gets cooler. am I alright running 50 weight?
it is 20 winter & 50 summer.....20 weight in the winter and 50 weight in the summer all in one oil.....as the 50 weight is just 50 weight all the time its thick....i wouldn't run it in my car but hey its your ride your choice......hope i helped
Reply
Old Aug 3, 2008 | 11:18 PM
  #7  
Evil Aviator's Avatar
Rotorhead
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 9,136
Likes: 39
From: Charlottesville, Virginia, USA
Originally Posted by tunerguy4life
im running 5w30 or 10w30 but its alot hotter where im at in louisiana
For Louisiana, you should be running 10w30 in the winter and 10w40 or 20w50 in the summer. I lived just north of St. Charles for 2 years, and I used Castrol 20w-50 year round since the temperature never fell below the mid-20s.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:51 PM.