2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Which Rtek7 should i get???

Thread Tools
 
Search this Thread
 
Old Jun 10, 2010 | 02:34 PM
  #1  
young Dizzy's Avatar
Thread Starter
1987 Rx7 Turbo2
 
Joined: Oct 2009
Posts: 39
Likes: 0
From: Upper Darby
Question Which Rtek7 should i get???

I got a s4 turbo 2 with a s5 motor with some bolt-on and a bigger turbo then stock i want to raise the boost but im not sure of which Rtek to grab in the process of buying a AFC and a Wideband. Im looking to push like 10psi normal n maybe like 15 racing if thats safe?? can any bodi help me out new to the boosted cars
Reply
Old Jun 10, 2010 | 03:01 PM
  #2  
lastphaseofthis's Avatar
My job is to blow **** up
Tenured Member 20 Years
iTrader: (8)
 
Joined: Jan 2005
Posts: 2,903
Likes: 5
From: palmyra Indiana
2.1 and no AFC > or 1.8 and AFC.. can you say, timing?
Reply
Old Jun 10, 2010 | 03:14 PM
  #3  
arghx's Avatar
rotorhead
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Aug 2004
Posts: 16,205
Likes: 461
From: cold
just go for the 2.1, it's a simpler and more powerful solution than the 1.7/1.8 + SAFC. and you get datalogging, timing control, plus the ability to adjust cranking fuel to prevent flooding
Reply
Old Jun 10, 2010 | 04:14 PM
  #4  
Hypertek's Avatar
Slowpoke
Tenured Member 05 Years
iTrader: (3)
 
Joined: Jun 2006
Posts: 5,273
Likes: 6
From: Socal
1.5, because you didnt say you upgraded injectors or anything.. im rocking 1.5, plan to step it up once i get injectors.. its only like $30 or so to upgrade the chip from 1.5 or so
Reply
Old Jun 10, 2010 | 06:22 PM
  #5  
lastphaseofthis's Avatar
My job is to blow **** up
Tenured Member 20 Years
iTrader: (8)
 
Joined: Jan 2005
Posts: 2,903
Likes: 5
From: palmyra Indiana
but he said he already upgraded his turbo, why would you think his stock injectors will support it?
Reply
Old Jun 10, 2010 | 07:50 PM
  #6  
Tessai76086's Avatar
hukd in fonikz
Tenured Member 05 Years
iTrader: (3)
 
Joined: Dec 2008
Posts: 80
Likes: 0
From: weatherford, Tx
Originally Posted by lastphaseofthis
but he said he already upgraded his turbo, why would you think his stock injectors will support it?
dumber things have happened.....
Reply
Old Jun 10, 2010 | 08:02 PM
  #7  
young Dizzy's Avatar
Thread Starter
1987 Rx7 Turbo2
 
Joined: Oct 2009
Posts: 39
Likes: 0
From: Upper Darby
im not sure wat cc my injectors are the guy i brought da car from had injectors that was too big and was making it flood alot i think the s4 injectors are in there. what cc are the s5 turboii injectors?
Reply
Old Jun 10, 2010 | 08:06 PM
  #8  
young Dizzy's Avatar
Thread Starter
1987 Rx7 Turbo2
 
Joined: Oct 2009
Posts: 39
Likes: 0
From: Upper Darby
so if i get the 2.1 i dont need a acf? n it depends on how much boost i wanna run for the secondary injectors cuz i was thinkin bout having 550cc for both, how much boost can i go with the 550 untill i need bigger ones sorry 4 the noob questions
Reply
Old Jun 10, 2010 | 08:55 PM
  #9  
RotaryRocket88's Avatar
Top Down, Boost Up
Tenured Member 10 Years
iTrader: (7)
 
Joined: Mar 2008
Posts: 8,718
Likes: 6
From: San Diego, CA
There's no point to an AFC if you have an Rtek 2.1.

You're going to blow the engine if you really do have stock 550cc injectors. You need to figure out what this upgraded turbo is, then get appropriately sized injectors. The stock turbo can max out stock injectors, let alone anything larger. Without any information on size/air flow potential, no one can tell you how much boost is safe on whatever turbo you have. My suggestion would be very little.
Reply
Old Jun 11, 2010 | 02:36 PM
  #10  
young Dizzy's Avatar
Thread Starter
1987 Rx7 Turbo2
 
Joined: Oct 2009
Posts: 39
Likes: 0
From: Upper Darby
I want to know wat turbo it is but when i brought the car the guy game me the turbo he said it was a upgrade never told me wat it was and it was blown. I had it rebuilt and installed on the car and the guy that did it said he cant figure out what it is. He had do extra to make it fit he did a good job tho. I guess ill get the 2.1 mines well get the best n no need for a afc rite?
Reply
Old Jun 12, 2010 | 12:01 AM
  #11  
AUGieDogie's Avatar
Rotary Freak
Tenured Member: 20 Years
iTrader: (4)
 
Joined: May 2003
Posts: 1,587
Likes: 4
From: seattle
Iif you arnt sure about things the 2.1 is also the choice. No need for an AFC OR a FCD

get this plus a wideband and you can keep a good eye on your AFRs.

Don't do raise your boost until you can figure out the fuel levels going to the engine.

Stock turbo injectors are 550x4 the nice thing about the rtek is that you can buy two 720s and throw them in, then just click a box. Then if you add two more 720s click another box.
Reply
Old Jun 13, 2010 | 12:14 AM
  #12  
young Dizzy's Avatar
Thread Starter
1987 Rx7 Turbo2
 
Joined: Oct 2009
Posts: 39
Likes: 0
From: Upper Darby
Ill get the 2.1 and all new injectors thanks for the info guys
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TerryD
2nd Generation Specific (1986-1992)
1
Aug 23, 2015 07:40 AM
turbo2ltr
2nd Generation Specific (1986-1992)
7
Feb 11, 2005 11:33 PM
Terrh
2nd Generation Specific (1986-1992)
19
Oct 28, 2004 08:29 PM
rx78788
2nd Generation Specific (1986-1992)
7
Jan 11, 2004 12:43 PM




All times are GMT -5. The time now is 09:46 AM.