replacing vacuum lines!
#1
Full Member
Thread Starter
replacing vacuum lines!
I was wondering if anyone knows how much of of what I need to replace all the vacuum lines and boost lines, cause I have a bad boost leak and a rough idle so figured maybe replacing all the lines would fix both. anyway post if you know
thanks
Marty
thanks
Marty
#2
Senior Member
Join Date: Sep 2006
Location: Toronto/Waterloo/Niagara Falls, Ontario
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Do a search. Theres a guide telling you how much of each size you need and what order to do it in.
This page tells you the sizes and lengths:
http://fc3spro.com/TECH/PROBLEMS/EM/vhoses.htm
But, if you're going to use silicon, you may want to cover the hoses with something since petroleum products eat silicon for breakfast.
This page tells you the sizes and lengths:
http://fc3spro.com/TECH/PROBLEMS/EM/vhoses.htm
But, if you're going to use silicon, you may want to cover the hoses with something since petroleum products eat silicon for breakfast.
#3
Eats, Sleeps, Dreams Rotary
mazdatrix says how much hose you need to replace the Vacuum lines
http://mazdatrix.com/c-silhos.htm
86-92 3.5mm 13ft
6.0mm 6ft
Jason NYC
http://mazdatrix.com/c-silhos.htm
86-92 3.5mm 13ft
6.0mm 6ft
Jason NYC
#4
Full Member
Thread Starter
well I got two different answers from both posts but most people I have asked said the first one that asked for 30 feet of 4 mm sounds like alot
also I can't find vacuum lines in the size i need but tons of fuel lines will they work or is there some special place to go to get those lines.
p.s. I am hoping I only need 3.5 mm - 13 , and 6 mm - 6 feet
thanks
marty
also I can't find vacuum lines in the size i need but tons of fuel lines will they work or is there some special place to go to get those lines.
p.s. I am hoping I only need 3.5 mm - 13 , and 6 mm - 6 feet
thanks
marty
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM