Those seats are hard to get in and out of! I don't know how you guys do it with your daily driven FC's.

 

how are the bride ebay ripoff's fitting for the "bigger" guys?

 

i dont think i would wit in my vert with after market seats

 

I bought a Bride Zeta III. Id recommend it.

 

recaro spg's

 

I started this thread, wound up getting new leather with a group buy from this and the no pistons forum. We got $499 for 2 buckets, I just finished my '88 vert, came out great.

As long as the foam and frame is in good shape this is a good option, took me about 10 hours to do 2 seats.

 

so you re upholstered your stock seats?

 

Yes, basically you remove seats from car, clip off about 50 hog ring staples that hold leather to foam and frame, then install new leather with hog rings. Took me about 5 hours per seat to do. Lot of pulling and stretching to get it in place.

Trying to add a pic as an attachment but it keeps hanging.

 

Hi.. I have an '88 vert with Lambo Doors as you can see by my avatar.. now the solution for your seats will be very simple... but its too much to type on here.. so if you feel comfortable enough you can call me and I will explain how to bolt the aftermarket seats in your RX7 convertible.. my name is Val and my number is 786-286-3351

or my email is: zondervanRX7@yahoo.com

 

Hey!
The seat rails for the coupe and convertible are not the same... you have several humps in the convertible because remember that the vert has to have a lot of reinforcements to make up for the lack of a solid roof... so the rails are not interchangeable.. check out this pic and check out the seats that i installed.. i had to make my own mounting holes.

 

Whered you get those? How much were they? :P I need some cheap seats that fit.

 

At the time when I purchased these i paid $ 230.00 for both... I have to check with my supplier to see if he still has them.. if not, then I can sell you mine since i am going to Leather anyway... Let me know by PM

 

do a search on installing racing seats(jgrts20 post), i have specs and pics to use. I left a diagram. Has all measured out holes of what you need.

 

Would I do a search on this website ? or some place else... ? You post was not very clear or am I missing something ?

Are you able to provide a link instead of having to fish for it. ?