Removing transmission under cover (T2)
12-11-04, 01:03 PM
#1
White Comet
Thread Starter
Join Date: Jan 2002
Location: Orange County
Posts: 2,145
Likes: 0
Received 0 Likes
on
0 Posts
Removing transmission under cover (T2)
Just wondering if someone can give me some insight as to whats involved when taking off the T2 transmissions under cover. The area im referencing too can be found on 7A-26 in the S4 FSM.
I removed all the bolts holding it on and could not get it to slip off. I tried prying at it and tapping it with a hammer but had no luck. I didnt remove the drain plug but I dont think this would have any effect on it.
Any other suggestion from those who have done it? Thanks!
I removed all the bolts holding it on and could not get it to slip off. I tried prying at it and tapping it with a hammer but had no luck. I didnt remove the drain plug but I dont think this would have any effect on it.
Any other suggestion from those who have done it? Thanks!
12-11-04, 10:59 PM
#3
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
Its held on with RTV... you have to push a thin wedge into it.. i used a putty knife and a mallett
do it at the corners first, then the middle
do it at the corners first, then the middle
Thread
Thread Starter
Forum
Replies
Last Post
David Hayes
3rd Generation Specific (1993-2002)
13
09-05-22 12:45 PM