removing omp
12-16-06, 03:17 PM
#1
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Vero Beach, Florida
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
removing omp
ok well i got a emission plate block off kit and im thinking about removing the omp because its leaking and i was wondering if their is a write up on it. also is there any cons on removing the omp?
12-16-06, 03:22 PM
#2
Eet fase
iTrader: (49)
Join Date: May 2002
Location: Lexington, SC USA
Posts: 1,759
Likes: 0
Received 0 Likes
on
0 Posts
You might want to try some search terms like "OMP removal" or "MOP removal" before you go taking things off. There is more to it then removing the MOP and blocking the space off. You have to run premix in the gasoline to make up for not having a functioning MOP on your car.
12-16-06, 05:10 PM
#5
Rotary Enthusiast
Join Date: May 2005
Location: bartlett IL
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fc3sna
ok well i got a emission plate block off kit and im thinking about removing the omp because its leaking and i was wondering if their is a write up on it. also is there any cons on removing the omp?
12-16-06, 05:48 PM
#6
The Cause of Death
Originally Posted by tinvestor
yes the PITA of adding oil to your gas every time you fill it up, and that means never letting anyone borrow your car either.
I let my ex borrow my car one day. I asked her if she drove it hard, she said no.
A few months later she told me she red lined the **** out of it.
Trending Topics
12-18-06, 04:10 PM
#10
Rotary Enthusiast
Join Date: May 2005
Location: bartlett IL
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by spot_skater
With the amount of work you've put into your car, would YOU let someone BORROW yours?
I let my ex borrow my car one day. I asked her if she drove it hard, she said no.
A few months later she told me she red lined the **** out of it.
I let my ex borrow my car one day. I asked her if she drove it hard, she said no.
A few months later she told me she red lined the **** out of it.
12-18-06, 04:42 PM
#11
Junior Member
Join Date: Nov 2006
Location: Ontario
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys I'm thinking of removing my metering pump as well. I'm just sketched about the pre-mix oil not getting through the fuel filter, and or clogging injectors.
I have an old rotor housing and i can see the wear. It seems like the oil is not spreading properly across the apex seals. Anyway those who are running pre-mix with stock fuel system let me know please.Thanks
I have an old rotor housing and i can see the wear. It seems like the oil is not spreading properly across the apex seals. Anyway those who are running pre-mix with stock fuel system let me know please.Thanks
12-18-06, 06:34 PM
#12
Eet fase
iTrader: (49)
Join Date: May 2002
Location: Lexington, SC USA
Posts: 1,759
Likes: 0
Received 0 Likes
on
0 Posts
Giro
Keep in mind although you can remove the metering oil pump and block off the space, you must leave it connected to the wiring harness or your car will go into limp mode.
Keep in mind although you can remove the metering oil pump and block off the space, you must leave it connected to the wiring harness or your car will go into limp mode.
12-18-06, 07:00 PM
#13
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 110 Likes
on
93 Posts
Originally Posted by cmanns
Why?
Isnt putting in premix annoying
Isnt putting in premix annoying
But what do I know...
To the original poster, there are multiple metering oil removal mods. You will find several in the archives, and premix has been covered many, many, many times before. A search for "how to premix", "metering oil remove", "MOP removal", "OMP removal" and variations on that will all turn up all the info you need. Searching, checking the FAQ and looking in the archives should be the first thing done when you have a question.
12-18-06, 10:09 PM
#17
ENGAGE LUDICROUS SPEED!!
Join Date: Aug 2006
Location: south florida
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sideways7
My biggest problem with premixing was the mess. No matter what you do you will end up getting premix on you sometimes, plus whatever you hold the funnel (or whatever) in gets nasty, etc. You get the idea.
https://www.rx7club.com/showthread.p...12#post6434712
12-18-06, 10:28 PM
#18
Originally Posted by wankelme!
not necessarily....check this out:
https://www.rx7club.com/showthread.p...12#post6434712
https://www.rx7club.com/showthread.p...12#post6434712
12-20-06, 07:21 AM
#24
Originally Posted by Sideways7
Come on, its not that bad, ya wimp 
Somehow it's worse if my windows are open even while moving...I'm thinking that a catch can or something where the charcoal canister used to be would help.
12-20-06, 10:41 AM
#25