Are relays interchangeable ?
#1
Are relays interchangeable ?
Stupid question but are relays interchangeable ?
89 vert. I wanted to test out a function on my car but I don't hear the relay clicking. Instead of running out and buying a new one I would like to swap one from another system.
Is it ok if it's the same prongs/wire #s ? Example: foglight relay on the fan relay.
And by relays I mean the ones by the rad support.
89 vert. I wanted to test out a function on my car but I don't hear the relay clicking. Instead of running out and buying a new one I would like to swap one from another system.
Is it ok if it's the same prongs/wire #s ? Example: foglight relay on the fan relay.
And by relays I mean the ones by the rad support.
#5
I
iTrader: (6)
is the AC charged? if not the low pressure switch wont let the compressor engage.
u could unplug the relay and manualy run 12V to the coil of the relay to see if it engages, then hook a multimeter up to the output side to check for continuity when u apply voltage(it should make an audiable noise tho)
u could unplug the relay and manualy run 12V to the coil of the relay to see if it engages, then hook a multimeter up to the output side to check for continuity when u apply voltage(it should make an audiable noise tho)
Thread
Thread Starter
Forum
Replies
Last Post