Rebuild waa?
04-28-08, 07:20 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2007
Location: Winter Haven, Florida
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Rebuild waa?
K, so im rebuilding a 1987 TII and I have a rebuild kit from racing beat that came with all stock parts to my knowledge. but I have been hearing that the turbo OME seals do not run well under boost, and I hope to be running 10 psi when its done and broken in. (I have a racing beat turbo back exhaust system) so a couple ppl have told me that the FD corner seals will perform better but the main site that im using to get parts from "MazdaTrix" classifies the corner seals from 86-95 as all being the same but the corner seal springs are drastically different. So would this imply that I only need to get FD corner seals springs and just go ahead and use the OME corner seals that came with my rebuild kit? Or is it more complicated then that T_T. if so does anyone know of a site that would sell generation specific corner seals? Much appreciated thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post