okay iv got over 100psi on both front and rear rotors.iv got fuel,and iv got spark..

so the problem i believe is in the wiring. what i need to know is what color wire goes to the low oil level sensor and what color wires go to the air temp sensor. and which injector clips are primary and secondary.

are the clips closes to the ecu the primary or te clips farthest away from the ecu?


and when i crnak it my oil pressure never rises and i belive it is supose to would this ahve anything to do with the sensor that is right next to the oilpressure sensor??? what wire is this supose to be??

i would look all of this up in the fsm but i cant open it on this old computer i can barely connect to the internet.

also there are 2 connectors with red wires that come out roughly by the driver floor board and they are close to the 2 green wires..these arnt pluged up becasue i only have 2 wires that have matching clips and they are red with green strip and i believe solid black and the 2 wires are solid red.

also what wire color connects to the wire coming from the power steering this wire at the pomer steering is black.

again sry for all these questions but i cant open the fsm