I got bored and im tired of seeing all these cold air pics off by the radiator so i thought id show mine please dont flame me to bad im 1 not a fan of cutting holes in my car anyways and 2 my afm is not flat so i dont know if that is hurting some... my engine bay pic its nasty dirty ugly you figure out a word and dont forget to look at my "drift style" exhaust for all you that remember the post thread and thats about that thanks for looking any and all feedback is welcome...

 

where are the pics

 

Right here fool sorry for some reason the forum says my pics are to big but ive posted some from the same camera before and the size is the same

http://hometown.aol.com/drifterxelit.../profile2.html

for the other pics you have to copy and paste the html at the bottom of the first page... -Gabe

 

can i get someone to host ..vaughnc??

 

I like your way alot better.

I see you no longer have the 6 port actuators. Did you just wire them open? You need to remove those restrictive actuator rods and glue the sleeves in or there is no gain. Try it you'll definitely notice it.

 

that belt looks pretty loose...

that's the same way BDC did it

 

No sleeves no problem....and yes my blet is loose that is the problem when you buy two NEW belts and they arent quite the same length...grrr

 

no sleeves no problem huh. where did u get that from? nice cold air intake. i think your the first in aug to do that!! haha gabe

 

Hey Scott you know BDC? I was just up in Dallas at his place last weekend. That is how he did it except his has an insulating wrap on it.

 

Gabe? You wouldn't happen to be Gabe Medo would you?

 

dude mount your amf horizontally, thats the position with the stock air box

 

Yeah thats me man i saw your post on the intake already got on it man good job....Blackrx7 "2 my afm is not flat so i dont know if that is hurting some... " yes ive already said that....of course i know its hurting something because i know to not turn it but oh well... im getting a 3 inch mandrel bent tube done if i find someone here and i will address that issue with the pipe bender so hopefully we can get it flat again thanks for the input though - Gabe

 

drift style is tyte yo!! hehe cool pics man

 

That looks great. So basically you mounted your air filter in the "brake air ducts" for your cold air huh? I bet that works great!

 

couldnt you just turn it too be straight or does it have to be that way for that intake? i forgot, i just woke up.

 

I too have a cold air intake, but mine is routed directly forward where the Hlight mounts use to be (I have non popups). BUT your setup looks great! I dont know why this mod isnt more common? Just to be safe If I had your setup Id buy one of those 50$ bypass valves from AEM. Also youd be one of the few rotaries with an AEM part! I like to laugh about the fact that my CAI(and 3" TB ilnet) is made from a Honda intake from DC!
BUT very nice owrk keep it. I have a lot of respect for inginuity, and do it your self sort of custom fabbing!

 

Drift style? Your cars body panels are too clean to be considered "drift style". Im curious why you called your exhaust "drift style".

 

Nate supposedly not having your afm mounted flat or horizontal where either the waffle is showing or the black cover is showing is asking for trouble but remember when i told you how my idle was jacking until i tilted my afm a little not enough to mess up the gravity on it though......

Boost...i too thought about using a honda intake for the piping because it fit the same with a little cutting and a 94 eclipse intake is about the same as well

Wan im glad you asked hehe https://www.rx7club.com/forum/showth...ht=drift+style Man i hope people arent thinking i am really considering my exhaust drift style cause im the guy that corrected that kid in the first place for calling it that

 

Hopefully by wednesday i will be posting pics of my bronze te37s....

 

Boost,
I am curious to know how much mazda is left on your car??

Justin