2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Racing Beat sound clip on my T2 Vert.

Thread Tools
 
Search this Thread
 
Old Apr 21, 2007 | 06:30 PM
  #1  
hurleysurf24's Avatar
Thread Starter
wtf rotary wtf
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,756
Likes: 1
From: Who knows
Racing Beat sound clip on my T2 Vert.

Well thought I'd be nice and throw a sound clip up so people can hear it.
BTW my car isnt able to hold an idle, so ignore the staling out in the middle of the vid.

I have a street ported engine and thats about it for performance mods that would effect sound of the exhaust.

I'm unsure why I am not holding idle and having a gargly sound below 3500 .. I'm thinking that the primaries are leaking and flooding the engine? Is this a good assumption?

Click on the pic and itll open the video
Reply
Old Apr 21, 2007 | 06:34 PM
  #2  
hurleysurf24's Avatar
Thread Starter
wtf rotary wtf
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,756
Likes: 1
From: Who knows
double post woops
Reply
Old Apr 21, 2007 | 09:04 PM
  #3  
NCross's Avatar
I have a rotary addiction
Tenured Member: 15 Years
iTrader: (18)
 
Joined: Jun 2006
Posts: 4,815
Likes: 24
From: Columbia, Tennessee
another victom of the TB mod I presume?
Reply
Old Apr 21, 2007 | 09:18 PM
  #4  
hurleysurf24's Avatar
Thread Starter
wtf rotary wtf
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,756
Likes: 1
From: Who knows
i didnt do the swap so i dont know but it sounds vaguely familiar that the guy that did it .. did in fact do this mod
Reply
Old Apr 21, 2007 | 09:31 PM
  #5  
TweakGames's Avatar
FD pro licensed driver
Tenured Member 10 Years
iTrader: (3)
 
Joined: Feb 2006
Posts: 2,897
Likes: 2
From: Renton/Bellevue/Seattle WA
I dont like it. Whats special about it again?
Reply
Old Apr 21, 2007 | 09:33 PM
  #6  
NCross's Avatar
I have a rotary addiction
Tenured Member: 15 Years
iTrader: (18)
 
Joined: Jun 2006
Posts: 4,815
Likes: 24
From: Columbia, Tennessee
if he did remove the secondaries then he messed around with other crap on it too. on thing that helped me was removing the rear dashpot and replacing it with a long bolt. it gives the main throttle cam something solid to rest against after it springs down from a rev.
Reply
Old Apr 21, 2007 | 09:34 PM
  #7  
NCross's Avatar
I have a rotary addiction
Tenured Member: 15 Years
iTrader: (18)
 
Joined: Jun 2006
Posts: 4,815
Likes: 24
From: Columbia, Tennessee
and you can actually adjust your idle with it (yeah yeah... yet another idle adjuster on the FC...)
Reply
Old Apr 21, 2007 | 09:41 PM
  #8  
hurleysurf24's Avatar
Thread Starter
wtf rotary wtf
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,756
Likes: 1
From: Who knows
i was trying to adjust the bac tonight .. and i think i came across a significant problem ... there is not adjustment screw in the bac ...
Reply
Old Apr 21, 2007 | 09:41 PM
  #9  
hurleysurf24's Avatar
Thread Starter
wtf rotary wtf
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,756
Likes: 1
From: Who knows
Originally Posted by TweakGames
I dont like it. Whats special about it again?
a bunch of people always ask for clips of a racing beat exhaust so i thought id kill two birds with one stone and put it up here
Reply
Old Apr 21, 2007 | 10:29 PM
  #10  
TweakGames's Avatar
FD pro licensed driver
Tenured Member 10 Years
iTrader: (3)
 
Joined: Feb 2006
Posts: 2,897
Likes: 2
From: Renton/Bellevue/Seattle WA
oh ok, sorry. I always see people talking about blah blah exhaust and im like ... air going through pipe.... yeup sorry kinda on a rant mood, worked on car for 8 hours today haha.
Reply
Old Apr 21, 2007 | 10:36 PM
  #11  
ppuppu9's Avatar
Full Member
 
Joined: Dec 2006
Posts: 50
Likes: 0
From: Boston
not the prettiest exhaust I must say...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CaptainKRM
2nd Generation Specific (1986-1992)
15
Aug 29, 2015 01:33 PM
GrossPolluter
General Rotary Tech Support
7
Aug 22, 2015 11:23 PM




All times are GMT -5. The time now is 01:27 PM.