Well noone has answered my question in the haltech section so i figured id ask here when can i purchase the TPS sensor for my Haltech E6k? Did it come factory on a certain GM vehicle? Which One?
Thanks
TweaK

 

google it, its about $45. If you just want to know if there is a cheap alternative, i dont know.

you can always use the stock sensor. even the narrow-scale S4 TPS will work. haltech only uses it for closed loop o2 control and decel fuel cut, which should both work fine with it. you may have to set the closed loop max TPS setting to near 100% though

 

^Haltech also uses it for throttle pump! You need the proper one. I see S5 "keg", does that mean you are running an S5 TB/TPS? I think the E6K can run an S5 TPS, but not an S4. That or any D-shaft sensor should work.

 

its an S5 keg with s4 throttle body.. i know i need to modify the throttle body to fit the TPS sensor any ideas?
Thanks
TwEaK

 

im looking to buy it if it came factory on a certain car? would like to get it running this weekend..

 

anyone bump!? cmon