2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

questions about Putting car away for winter

Thread Tools
 
Search this Thread
 
Old Nov 5, 2005 | 06:43 PM
  #1  
gray_86's Avatar
Thread Starter
ThE_CaRbOn_GuRu
Tenured Member 05 Years
 
Joined: Jan 2005
Posts: 221
Likes: 0
From: lucan
questions about Putting car away for winter

I live in london ontario canada and it gets pretty cold here like -20'C and this is the first year i have had a car to store in the winter i was just wondering what I should do to the car over the winter right now it is just inside
Reply
Old Nov 5, 2005 | 09:08 PM
  #2  
sTaLa's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jun 2005
Posts: 159
Likes: 0
From: Wherever you want
Wash (interior and exterior) and wax the car.
Put 50 lbs in your tires (to prevent flat spots).
Put the car on jackstands, just enough to unload the suspension a bit (you don't want it to be exented for the whole winter).
Change the coolant.
Add fuel storage additive to the fuel tank and full the tank.
Change the oil.
Disconnect the fuel pump relay connector (EGI fuse) while the engine is running to eliminate the pressure.
Put some fogging oil in the spark plugs holes, crank the engine by hand and replace the plugs.
Fill all the holes (intake and exhaust).
Keep your windows opened of 1 cm.
Leave the shifter in neutral and don't engage the hand brake.
Remove the batterie and keep it insinde.

That's what I'm gonna do tomorrow.

And you could have searched... there are so many threads that cover that exact subject.

Alex
Reply
Old Nov 5, 2005 | 10:12 PM
  #3  
gray_86's Avatar
Thread Starter
ThE_CaRbOn_GuRu
Tenured Member 05 Years
 
Joined: Jan 2005
Posts: 221
Likes: 0
From: lucan
Does it make a differance if the floor is sand
Reply
Old Nov 5, 2005 | 10:16 PM
  #4  
Turbo II-FB's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 1,879
Likes: 0
From: Austin-Houston Texas
way not just take out the coolant so the seals dont have an fluid sitting on them
Reply
Old Nov 5, 2005 | 10:42 PM
  #5  
sTaLa's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jun 2005
Posts: 159
Likes: 0
From: Wherever you want
Originally Posted by gray_86
Does it make a differance if the floor is sand
Correct me if I'm wrong, but I think it's actually a good thing. Sand will help reducing the humidity from what I've heard.

Originally Posted by Turbo II-FB
way not just take out the coolant so the seals dont have an fluid sitting on them
I agree with not taking out the coolant but I don't with not changing it.
I think it should be changed to be sure nothing will freeze at - 20 C. In my area it is easily going to be - 30 C sometimes, so I'll change the coolant and let the engine runs for a while after.
Reply
Old Nov 5, 2005 | 10:46 PM
  #6  
gray_86's Avatar
Thread Starter
ThE_CaRbOn_GuRu
Tenured Member 05 Years
 
Joined: Jan 2005
Posts: 221
Likes: 0
From: lucan
Thanx Guyz That will give me something to do tommorow I am going to have buy some tissues to I hate to put it away for so long
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
thecody59
1st Generation Specific (1979-1985)
14
Jan 23, 2016 11:52 AM
Marty RE
Introduce yourself
3
Aug 29, 2015 07:51 AM
Professorpeanutrx7
New Member RX-7 Technical
5
Aug 15, 2015 01:38 PM
Marty RE
New Member RX-7 Technical
0
Aug 13, 2015 11:19 AM




All times are GMT -5. The time now is 07:34 PM.