2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

question on replacing injectors

Thread Tools
 
Search this Thread
 
Old Jul 20, 2004 | 12:37 PM
  #1  
josh greene's Avatar
Thread Starter
87 T2
Tenured Member 05 Years
 
Joined: Jun 2002
Posts: 924
Likes: 0
From: florida
Question question on replacing injectors

Im having problems with my 87 N/A, https://www.rx7club.com/showthread.p...7&page=2&pp=15 . In the future im going to add a s/c and will have to have bigger injectors. My question is will putting bigger injectors on now cause any problems to my stock 87 N/A? also should i replace the primary with bigger ones if i put bigger ones on the secondary? also what size/kind/where to get them, injectors should i get that will accomadate my needs and cheep??
if you have any ideas on my problem in the thread link above please help.
THANKS ALOT, J GREENE
Reply
Old Jul 20, 2004 | 12:52 PM
  #2  
SDrotary-FC's Avatar
@ pipnorcali
Tenured Member 15 Years
 
Joined: Jan 2004
Posts: 2,751
Likes: 1
From: Grass valley, ca
i would keep them stock til you get the S/C then slap in a set of turboII sec. that should give you enough fuel
Reply
Old Jul 20, 2004 | 01:46 PM
  #3  
13bpower's Avatar
s4 for life
Tenured Member 15 Years
 
Joined: May 2002
Posts: 2,516
Likes: 1
From: Oahu
Putting bigger injectors in now will cause you to run rich, lose power, get worse gas milage, bog the car down when the secondaries kick in, and just gerneraly make you car run like a pile.

550 primaries and secondaries will be good when you get the S/C
Reply
Old Jul 20, 2004 | 02:19 PM
  #4  
josh greene's Avatar
Thread Starter
87 T2
Tenured Member 05 Years
 
Joined: Jun 2002
Posts: 924
Likes: 0
From: florida
does anyone know where to get stock injectors cheep!?!!??!!!???
Reply
Old Jul 20, 2004 | 02:38 PM
  #5  
J-Rat's Avatar
Alcohol Fueled!
Tenured Member 20 Years
iTrader: (2)
 
Joined: Jan 2002
Posts: 11,093
Likes: 2
From: Hood River oregon
Unless you get some sort of fuel control, you need to stick to your stock injectors. The SAFC would control bigger injectors for you.
Reply
Old Jul 20, 2004 | 04:08 PM
  #6  
wpgrexx's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Dec 2001
Posts: 1,350
Likes: 0
From: not in winterpeg anymore
used classifieds or new the cheapest I found was www.MAZDARACING.com
Reply
Old Jul 20, 2004 | 04:12 PM
  #7  
ddub's Avatar
i am legendary
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 8,478
Likes: 1
From: Kirkland, WA
Originally Posted by josh greene
does anyone know where to get stock injectors cheep!?!!??!!!???
Ebay!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
c0rpse
2nd Generation Specific (1986-1992)
1
Aug 25, 2015 11:50 PM
morataya
Microtech
1
Aug 16, 2015 09:39 AM
86rxNa
2nd Generation Specific (1986-1992)
2
Aug 11, 2015 11:51 AM




All times are GMT -5. The time now is 04:08 PM.