question on guage hookup
#1
Senior Member
Thread Starter
Join Date: Apr 2001
Location: augusta ga
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
question on guage hookup
the power is to goto the ignition switch and i already have something running from the 1g power on the ecu, so where is the ignition switch wire or where should i hook that up?
#5
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
As I recall, you want the white/black wired directly under the steering column. There will be a two wire plug, with a black wire as well. Test with a voltmeter to be sure...
Also, did you say you tapped the stereo harness for an electric fan? Bad idea. Better find a direct connection to the battery and use a relay. The electric fan draws LOTS more current then that harness was designed for.
Also, did you say you tapped the stereo harness for an electric fan? Bad idea. Better find a direct connection to the battery and use a relay. The electric fan draws LOTS more current then that harness was designed for.
#7
Senior Member
Thread Starter
Join Date: Apr 2001
Location: augusta ga
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
yea i just got it..i got the remote wire on the radio that i had the efan running to fromt he relay and ran that to a open spot on the fuse box and ill just run that water temp guage to that remote wire instead
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM