question on exhaust
#27
needs an FD
Join Date: Dec 2005
Location: sacramento
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
type-zero...i've got dual borlas and it sounds great...plus in my opinion they look better, more balanced to have one on each side as opposed to just hangin on one side, especially if u have the stock rear bumper that has cutouts for duals...looks kinda funky when one of the cutouts is just chillin
#28
75LIDE7
Thread Starter
Join Date: Oct 2005
Location: va beach, va
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
yeah i agree. the only single side exit exhaust i would ever consider is the apexi gt. does anybody have pics of racing beat, hks, greddy etc etc on their car??
thanks
thanks
#29
The Cause of Death
Go for a header of some sort, you'll want a presilencer or one of those borla XR-1 mufflers (to use as a presilencer), then I'd go for a RB cat back.
The RB mufflers are quality, quiet, and have nice 3" tips, and it's got a dual muffler design.
I've got the full RB system on my NA, and I love it.
James
PS: This is if you don't have to worry about emissions, in place of a silencer or muffler throw in a cat or two, and you should be good.
The RB mufflers are quality, quiet, and have nice 3" tips, and it's got a dual muffler design.
I've got the full RB system on my NA, and I love it.
James
PS: This is if you don't have to worry about emissions, in place of a silencer or muffler throw in a cat or two, and you should be good.
#34
Full Member
iTrader: (1)
Join Date: Sep 2005
Location: Guelph Ont.
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
i ran into the same problem last oct. i ended up buying a borla cat. back system ($950 cdn.) and it runs, sounds and performs great. it was a 12hp gain, and its not overly loud. its 3 in. all the way back, and i havn't had any regrets so far. its an entirly stainless system, and is covered by an unconditional 1,000,000 warantee. look into it.
#35
Tear you apart
iTrader: (10)
Originally Posted by jeff_rx7
i ran into the same problem last oct. i ended up buying a borla cat. back system ($950 cdn.) and it runs, sounds and performs great. it was a 12hp gain, and its not overly loud. its 3 in. all the way back, and i havn't had any regrets so far. its an entirly stainless system, and is covered by an unconditional 1,000,000 warantee. look into it.
#36
75LIDE7
Thread Starter
Join Date: Oct 2005
Location: va beach, va
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
spot skater if i used the headers-presilencer set up instead of the cat would that be loud as well? also does anybody know the difference bewtween the streetable header and the header/collector?
#37
Tear you apart
iTrader: (10)
Originally Posted by playdeadva
spot skater if i used the headers-presilencer set up instead of the cat would that be loud as well? also does anybody know the difference bewtween the streetable header and the header/collector?
Its header and presilencer. It will raise the exhaust note, but it depends on yoru cat-back. If you use a Borla, Racing Beat, or 50MM HKS exhaust it'll be quiet. If you use any N1 setup or anything with rear mufflers that don't really muffel, it'll be very loud.
If the cat-back looks like it'll be loud, it'd be loud.
#40
The Cause of Death
The presilencer quiets it down quite a bit, as a cat would.
Some people don't like RB though, and have had better power gains with custom exhausts.
Kahren has made more power with his custom manifold, for instance...
Personally, I'm a fan of RB's products. All directly bolt on, and it is quality stuff. But it is EXPENSIVE.
James
Some people don't like RB though, and have had better power gains with custom exhausts.
Kahren has made more power with his custom manifold, for instance...
Personally, I'm a fan of RB's products. All directly bolt on, and it is quality stuff. But it is EXPENSIVE.
James
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM
12abridgeport
1st Generation Specific (1979-1985)
2
08-17-15 06:28 PM