I know there is a safc section but its basically a graveyard and im hoping to get a better response here. First of all my fc came with a safcii already installed and running. The car runs and responds to adjustments i make in the safc. I recently decided to look deeper into the setting and details and found out that the base setting have it listed as a 4 cylinder. The manual clearly states that a rotary should be set as a 2 cylinder. Would I be risking anything by changing this setting at this point?

 

I took a read through the instructions and it says that it should be set by the number of rotors multiplied by 2. So 4 cylinder is the right setting.

 

I've had SAFC and SUPER SAFC and more or less read the manuals and NEVER seen where you set it to two cylinders. On a series four it's four cyl and arrow up and to the right.

Go to APEXI online and download their manual and read it. I'd do it and post it, but moderators wipe out any and all imformative posts/theads/ jps/ urls etc.

 

Maybe I just read it wrong at 3am, ill check again, sorry for the waste of time.

 

its 4 cylinder mode