2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Question

Thread Tools
 
Search this Thread
 
Old 01-16-09, 04:46 PM
  #1  
No Pistons
Thread Starter
 
DRFTFC23's Avatar
 
Join Date: Nov 2008
Location: Calgary
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
Question

I just have a question, I have an 86 FC RX7 N/A
and on the idiot cluster the clock doesnt work and the ebrake symbol does not work, it was just working and then it stopped everything else works but just not the clock and when the ebrake is on the symbol does not light up???
so im just wondering wut i can do to fix this and where to look
Old 01-16-09, 04:48 PM
  #2  
na5
anyone seen my head

 
na5's Avatar
 
Join Date: Nov 2006
Location: albuquerque nm
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts
common problem check your bulbs first but the idiot clusters are known to go out fairly commonly
Old 01-16-09, 04:49 PM
  #3  
No Pistons
Thread Starter
 
DRFTFC23's Avatar
 
Join Date: Nov 2008
Location: Calgary
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
the bulbs in the cluster??
how do you remove the cluster to check??and like it was just working and i was setting the clock and it just stopped...
Old 01-16-09, 05:39 PM
  #4  
na5
anyone seen my head

 
na5's Avatar
 
Join Date: Nov 2006
Location: albuquerque nm
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts
pop off the suround be careful very brittle you might be able to see some slots the n there are two screws holding the cluster lemme get back to you after this i have to look at mine
Old 01-16-09, 07:02 PM
  #5  
No Pistons
Thread Starter
 
DRFTFC23's Avatar
 
Join Date: Nov 2008
Location: Calgary
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
yea i just went out and the ebrake light is now working.. but clock is still not working...
Old 01-16-09, 07:22 PM
  #6  
Rotor Junkie

iTrader: (5)
 
Hazard15301's Avatar
 
Join Date: Sep 2006
Location: Washington, PA
Posts: 1,007
Likes: 0
Received 1 Like on 1 Post
Probably cold solder points. There is a write-up somewhere, let me try to find it...

Can't find it, but if I recall correctly, you just resolder the pins on the connector going into the cluster. I did it to mine and it fixed it. It's a common thing so I hope someone else chimes in with the write-up.
Old 01-17-09, 02:03 AM
  #7  
No Pistons
Thread Starter
 
DRFTFC23's Avatar
 
Join Date: Nov 2008
Location: Calgary
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
^ ok thanks man and to everyone for all there help and yea hopefully someone can provide the write up on how to do that
Old 01-17-09, 02:06 PM
  #8  
No Pistons
Thread Starter
 
DRFTFC23's Avatar
 
Join Date: Nov 2008
Location: Calgary
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
And also another Question my sunroof when you go to open it you hear the motor goin and it only pops up like a few cm's and wont go anymore so i was just wondering how you can access it and see if it is off the track or something..??
Old 01-17-09, 03:00 PM
  #9  
na5
anyone seen my head

 
na5's Avatar
 
Join Date: Nov 2006
Location: albuquerque nm
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts
there is a round plug on your headliner a few inches back pop that and there is an allen head? or torx head bolt there. this is your manual drive for the roof turn it afew times if it moves your motor or tracks may be dead or dirty if no movement might be off track or broken (chain?)
Old 01-17-09, 07:25 PM
  #10  
No Pistons
Thread Starter
 
DRFTFC23's Avatar
 
Join Date: Nov 2008
Location: Calgary
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
^ ok ill try that and see wut happens and let you know
Old 01-17-09, 10:04 PM
  #11  
No Pistons
Thread Starter
 
DRFTFC23's Avatar
 
Join Date: Nov 2008
Location: Calgary
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
K so i just tried turning it, it does not move at all.....?
Old 02-03-09, 06:04 PM
  #12  
No Pistons
Thread Starter
 
DRFTFC23's Avatar
 
Join Date: Nov 2008
Location: Calgary
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
anyone???
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
05-25-21 05:37 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM



Quick Reply: Question



All times are GMT -5. The time now is 03:01 AM.