Putting dash back together - missing connectors?
08-13-03, 08:32 PM
#1
Turbo Swamp Thing
Thread Starter
iTrader: (2)
Join Date: Jul 2002
Location: 195 Miles West of Bridgeport, WA
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
Putting dash back together - missing connectors?
Alright so I have a couple connectors that don't go to anything right now, I am assuming the connector on the heater fan probably connects to the connector on the logicon, since the way the logicon is plugged in right now, the fan control and a/c button are the only things that dont work on it. So I just need to know how this all hooks up and if im missing anything. The FSM didn't really help me figure out whats wrong.
08-14-03, 10:15 PM
#4
I just had my dash apart the other day, and I don't believe anything connects to that plug in my car. Have you looked at the factory service manuals on fc3s.org? There should be a lead that plugs into that jack on the logicon though, long cable with black wrapping... if memory serves me... 
08-14-03, 10:23 PM
#5
Full Member
Join Date: Aug 2003
Location: Richmond,Va
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
you probably lost the logicon plug behind the dash, the one on the heater I tend to agree with digital, don't think mine plugs into anything, the only other component in that area that you're missing is the factory amp for the stereo
08-15-03, 12:49 AM
#6
Former Moderator. RIP Icemark.
The only plug that is disconnected in the top pictures that I can see is for the factory security system (the large 20+ pin white/clear molex plug in the middle).
and in your logicon pictures, you are missing the logicon Amp, which screws on to the logicon where the plug in your pictures are.
and in your logicon pictures, you are missing the logicon Amp, which screws on to the logicon where the plug in your pictures are.
08-15-03, 05:09 AM
#7
Turbo Swamp Thing
Thread Starter
iTrader: (2)
Join Date: Jul 2002
Location: 195 Miles West of Bridgeport, WA
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
Kick ***, the logicon amp was exactly what I needed, i was wondering what the hell that little black box connected to... Now everything on the logicon works and I can proceed with putting the rest of the dash back together. Thank you very much.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM