2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

project racecar part 2 **PICS!**

Thread Tools
 
Search this Thread
 
Old Sep 11, 2005 | 09:39 PM
  #1  
TwEaK's Avatar
Thread Starter
Rotors? What Are Those?
Tenured Member 05 Years
iTrader: (6)
 
Joined: Jul 2003
Posts: 2,601
Likes: 0
From: Jefferson City, Tn
project racecar part 2 **PICS!**

Well guys i told u i would finish the racecar today i spent the day with fc3s-gxl and we remove the old dash all **** the behind the dash and installed the new dash here are some pics....
Thanks



here we are removing the harness from the dash to put it on the grey one...



old dash with harness out



here is a pic right before we started to remove emmisions



here is a pic of the dash removed you can see the amount of weight behind there lol =D
Reply
Old Sep 11, 2005 | 09:41 PM
  #2  
TwEaK's Avatar
Thread Starter
Rotors? What Are Those?
Tenured Member 05 Years
iTrader: (6)
 
Joined: Jul 2003
Posts: 2,601
Likes: 0
From: Jefferson City, Tn


crap that was taken out and thrown out =)



random pic =P



pic with the new dash in



pic with all electrical done and checking to make shure everything works....



pic with motor runing



pic of gauges with all electrical working....

it took about a whole day and we removed about 150lbs on junk from the car =)
Thanks Again
TwEaK
Reply
Old Sep 11, 2005 | 09:42 PM
  #3  
Syncro's Avatar
Buildup Thread Encourager
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 1,170
Likes: 0
From: Miami, FL
*edit* Post removed
Asked how long it took 2 seconds after he posted the second batch

Last edited by Syncro; Sep 11, 2005 at 09:49 PM.
Reply
Old Sep 11, 2005 | 10:17 PM
  #4  
TwEaK's Avatar
Thread Starter
Rotors? What Are Those?
Tenured Member 05 Years
iTrader: (6)
 
Joined: Jul 2003
Posts: 2,601
Likes: 0
From: Jefferson City, Tn
lol i started at around 1 and finished at around 10 big difference ill have more pics up soon when i finish the emmisons removal and do the exhaust work...
TwEaK
Reply
Old Sep 12, 2005 | 12:06 AM
  #5  
TwEaK's Avatar
Thread Starter
Rotors? What Are Those?
Tenured Member 05 Years
iTrader: (6)
 
Joined: Jul 2003
Posts: 2,601
Likes: 0
From: Jefferson City, Tn
hmmm well anyways little update of whats gonna go down tmw .. hopefully tmw ill finish removing all the tar from the floor boards.. and spraying a coat of black on it... then after that ill most likely wash the car because it needs one hell of a washing lol.....

by the way quick question how do you think the car would handle with the factory suspension but throwing on drag radials on all 4 rims???
TwEaK
Reply
Old Sep 12, 2005 | 12:29 AM
  #6  
SonicRaT's Avatar
Super Raterhater
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Dec 2001
Posts: 10,630
Likes: 3
From: NY, MA, MI, OR, TX, and now LA or AZ!
Not very good, it's going to have roll in it not be very balanced. Why did you keep the idiot cluster/etc? I'd of ditched all of that and just stayed with a tach and installed aftermarket gauges as needed. Also, not a good idea to start with no radiator! :o
Reply
Old Sep 12, 2005 | 12:39 AM
  #7  
TwEaK's Avatar
Thread Starter
Rotors? What Are Those?
Tenured Member 05 Years
iTrader: (6)
 
Joined: Jul 2003
Posts: 2,601
Likes: 0
From: Jefferson City, Tn
lol this is a budget race car between 3 very good friends lol i told my friends i didnt want to take it out until it had some suspension work but they just wanna get it running and take it out like that with the factory suspension to see how it handles i told them we would look like morons because wed be all over the road lol but they dont care when i had turned on the car it was for no more than about 15 sec just to take the pics after that it got turned off and pushed into the garage to go to sleep for the night lol =)
TwEaK
Reply
Old Sep 12, 2005 | 12:45 AM
  #8  
SiKoPaThX's Avatar
Porque tan serio?
Tenured Member 15 Years
iTrader: (2)
 
Joined: Jun 2002
Posts: 1,932
Likes: 0
From: St. Petersburg, FL
It's definitely got some work to go but it will be fun when it's done
Reply
Old Sep 12, 2005 | 12:43 PM
  #9  
TwEaK's Avatar
Thread Starter
Rotors? What Are Those?
Tenured Member 05 Years
iTrader: (6)
 
Joined: Jul 2003
Posts: 2,601
Likes: 0
From: Jefferson City, Tn
dont worry ill let you drive it =) as long as you dont break anything

TwEaK
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CaptainKRM
2nd Generation Specific (1986-1992)
14
Aug 26, 2015 09:52 PM




All times are GMT -5. The time now is 07:17 PM.