2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

problems, problems and more problems

Thread Tools
 
Search this Thread
 
Old 11-07-02, 03:16 PM
  #1  
Full Member

Thread Starter
 
vicious525E's Avatar
 
Join Date: Oct 2002
Location: spring hill, tennessee
Posts: 142
Likes: 0
Received 0 Likes on 0 Posts
problems, problems and more problems

ok, i just got done cleaning up my car and installing a e- fan, i decided to put it all back togather and see if the fuel pump cut off switch i installed worked, and so i started it up, first off the fuel pump switch didn't work but a more pressing issue is that after running for a few minutes i noticed smoke comming from somewhere near the turbo, i took off the intake and looked around, the smoke seemed to be comming from the turbo manafold for the most part, it also seemed to be comming from the lower coolent hose, it wasn't alot of smoke but smoke non the less and more than enough to realy get me worried, there is also not alot agean but a little oil on the bottom of the turbo manafold... please any help would be nice, im realy worried, i thought that maby my turbo was blown but since its comming from the turbo manafold right next to the engine it realy scared ...
Old 11-07-02, 06:56 PM
  #2  
Full Member

Thread Starter
 
vicious525E's Avatar
 
Join Date: Oct 2002
Location: spring hill, tennessee
Posts: 142
Likes: 0
Received 0 Likes on 0 Posts
^bump^
Old 11-08-02, 06:06 AM
  #3  
Full Member

Thread Starter
 
vicious525E's Avatar
 
Join Date: Oct 2002
Location: spring hill, tennessee
Posts: 142
Likes: 0
Received 0 Likes on 0 Posts
damnit someone help!!!
Old 11-08-02, 06:09 AM
  #4  
Senior Member

 
TheTwinTurboRX-7's Avatar
 
Join Date: Mar 2001
Location: Raymond, ME / New Orleans, LA
Posts: 493
Likes: 0
Received 0 Likes on 0 Posts
I do believe it is normal to get a little oil in your manifold when the car has been sitting a long time. I am sure someone will correct me if the late hour has sapped my brain. If that is the case it will burn off and you will be no worse for wear.

Ben
Old 11-08-02, 06:12 AM
  #5  
Full Member

Thread Starter
 
vicious525E's Avatar
 
Join Date: Oct 2002
Location: spring hill, tennessee
Posts: 142
Likes: 0
Received 0 Likes on 0 Posts
for a little while i was alot more then a little oil, i took it to have the oil changes and the next day when i came out side there was a small puddle, it did this for a little while and ten stoped, i assumed it was ok until the smoking started, it doesn't seem like theres any white smoke comming from the exhaust, just the turbo manafold...
Old 11-08-02, 06:14 AM
  #6  
Rotary Enthusiast

 
chris-reedtn's Avatar
 
Join Date: Oct 2002
Location: The Boro, TN
Posts: 775
Likes: 0
Received 0 Likes on 0 Posts
Ill be down in jax in like two weeks ted, i think? Ill help you out then. But wait someone said that im a newbie, so i don't know if i can. lmao. but yea, ill look at it for ya.

peace-
Old 11-08-02, 06:25 AM
  #7  
Full Member

Thread Starter
 
vicious525E's Avatar
 
Join Date: Oct 2002
Location: spring hill, tennessee
Posts: 142
Likes: 0
Received 0 Likes on 0 Posts
bring the god damn vacume hoses too!!!!!!!!!
Old 11-08-02, 06:27 AM
  #8  
Full Member

Thread Starter
 
vicious525E's Avatar
 
Join Date: Oct 2002
Location: spring hill, tennessee
Posts: 142
Likes: 0
Received 0 Likes on 0 Posts
do you like my new little picture thingie
///
<--------------------------------
\\\
Old 11-08-02, 06:27 AM
  #9  
Rotary Enthusiast

 
chris-reedtn's Avatar
 
Join Date: Oct 2002
Location: The Boro, TN
Posts: 775
Likes: 0
Received 0 Likes on 0 Posts
ok i will, o and i love that avatar!

-Chris
Old 11-08-02, 06:28 AM
  #10  
Full Member

Thread Starter
 
vicious525E's Avatar
 
Join Date: Oct 2002
Location: spring hill, tennessee
Posts: 142
Likes: 0
Received 0 Likes on 0 Posts
i know the one with the blond hair, lol, she wants to have my baby, j/k
Old 11-08-02, 07:06 AM
  #11  
Full Member

Thread Starter
 
vicious525E's Avatar
 
Join Date: Oct 2002
Location: spring hill, tennessee
Posts: 142
Likes: 0
Received 0 Likes on 0 Posts
well damnit, does anyone know, even an idea would help a hell ov alot
Old 11-08-02, 07:12 AM
  #12  
Rotary Enthusiast

 
chris-reedtn's Avatar
 
Join Date: Oct 2002
Location: The Boro, TN
Posts: 775
Likes: 0
Received 0 Likes on 0 Posts
like i told you before, from your info on the phone, i think that its either an oil feed line, oil injector hose, or a cracked dowl pin seat.

-Chris
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WyomingTII
2nd Generation Specific (1986-1992)
12
09-28-15 10:32 AM
lnlreaper
2nd Generation Specific (1986-1992)
2
09-27-15 09:59 AM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM



Quick Reply: problems, problems and more problems



All times are GMT -5. The time now is 07:25 AM.