2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Problems with new rx7

Thread Tools
 
Search this Thread
 
Old 05-30-06, 12:34 PM
  #1  
Junior Member

Thread Starter
 
antboy1500's Avatar
 
Join Date: May 2006
Location: michigan
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Problems with new rx7

I just bought a 1989 rx7 convertable non turbo and im having some troubles. When i hit the gas pedal at least half way down the engine bogs out. The check engine light is on. Sometimes when i hit the headlights on it misfires right away once and after that i can hit the gas pedal down but it idels real high about 3000 rpm and i have more power but if i put the lights off it goes back to no power and can't hit the gas pedal to much. when the headlights are off and it idles rough and still high about 1000 - 1500 rpm.
Old 05-30-06, 12:47 PM
  #2  
Senior Member

 
synesthete's Avatar
 
Join Date: Aug 2005
Location: Portland. OR
Posts: 303
Likes: 0
Received 0 Likes on 0 Posts
What kind of voltages are you seeing with the light on an off. Probable bad battery or alernator, sounds like a power issue.

If your voltage sucks like below 12 on your dash gauge. Get a multimeter or go to a battery place and have them check your battery and alternator. Make sure the belt on the alternator is tight. Check your grounds too.

Check the faq and search for how to pull your engine codes, it is not that hard and could point you in the right direction. There is a good write-up on the archive about grounding.

Last edited by synesthete; 05-30-06 at 12:51 PM.
Old 05-30-06, 01:00 PM
  #3  
Junior Member

Thread Starter
 
antboy1500's Avatar
 
Join Date: May 2006
Location: michigan
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
On my voltage gauge inside the car it stays right around the line above 12, thanks for the advice im going to try it.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kyo
2nd Generation Specific (1986-1992)
6
04-13-19 09:24 AM
Th0m4s
Build Threads
25
02-26-19 02:04 AM
Sharkbait24
New Member RX-7 Technical
1
08-12-15 10:36 AM



Quick Reply: Problems with new rx7



All times are GMT -5. The time now is 08:41 AM.