problem with illumination switch, need answer.
#1
Junior Member
Thread Starter
Join Date: Jun 2007
Location: Michigan
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
problem with illumination switch, need answer.
is it common for the illumination to keep shorting located on the headlight switch. i replace that harness twice but the white/green wire keeps burning out causing the plug to melt. the car is completely stock.
#3
Rotary Gearhead
iTrader: (6)
If you replace the burnt harness without replacing the switch at the same time, the problem will return due to the high resistance at the oxidized switch pins. Also a good idea would be to do the relay mod (search) which takes the parking lamp circuit load off the switch. Also check for corroded lamp sockets causing high resistance and burnt switch wiring.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM