pressure sensor
Thread Starter
Junior Member
Joined: Aug 2005
Posts: 17
Likes: 0
From: LANSING, MI
pressure sensor
I have a 91 RX-7 N/A. I noticed that there are several pressure sensors out there for sell. Would it matter if a pressure sensor is a different year as long as it is a 2nd Generation 13B engine and also being a N/A? My pressure sensor series numbers are N370 2917 E1T10775.
Lives on the Forum
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
Your 1991 can only use a pressure sensor for a 1989 - 1991 non-turbo.
You cannot use a 1986 - 1988 non-turbo pressure sensor, cause the wires are different.
Yours uses an extra power reference (12VDC or 5VDC), so it's not interchangable.
You can't use a turbo one cause the scale is different - you need a "1 bar" sensor, while the turbos are "2 bar" sensors.
-Ted
You cannot use a 1986 - 1988 non-turbo pressure sensor, cause the wires are different.
Yours uses an extra power reference (12VDC or 5VDC), so it's not interchangable.
You can't use a turbo one cause the scale is different - you need a "1 bar" sensor, while the turbos are "2 bar" sensors.
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
May 25, 2016 12:42 PM
t-von
3rd Generation Specific (1993-2002)
9
Sep 10, 2015 01:56 PM