iv searched but found nothing.how are you guys blocking off the oil injectors and oil metering pump.

thanks
jake

 

the injectors require a M10 x 1.25 bolt from Napa. 50 cents each. need four. will need to be cut to length.

the pump for me, i just removed the lines and replaced with little bolts to block of the feeds. then removed the metal piece that goes from the pump to the TB.

 

did you need to use any lock tite or antthing like that in the plugs for the oil injectors

 

use the oem crush washers used for the injectors.

 

locktite doesnt hurt either

 

cool, thank for the help guys

 

I wonder if the pump passes any oil when the control linkage is in the idle position. Will the pump be effectively disabled...just by removing the control link?