2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Power Steering Pump Problem?

Thread Tools
 
Search this Thread
 
Old 12-10-06, 11:29 PM
  #1  
Junior Member

Thread Starter
iTrader: (1)
 
mrturbo311's Avatar
 
Join Date: Oct 2004
Location: Santa Barbara
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Power Steering Pump Problem?

Hello,

I was just wondering if the 91 Turbo II power steering pump fails a lot on these cars? I was drifting at the track yesterday and all of a sudden my powersteering doesn't work anymore..it was a battle for me to try and turn the car. I understand it's an old car, but I've just heard from a friend that these things fail often on the FC. Is this true?

Eric

Last edited by mrturbo311; 12-10-06 at 11:44 PM.
Old 12-11-06, 12:12 AM
  #2  
Rotary Slave

iTrader: (3)
 
FCKing1995's Avatar
 
Join Date: Jul 2005
Location: Birmingham, Alabama
Posts: 1,599
Likes: 0
Received 1 Like on 1 Post
Not sure if they fail often, but running without a p/s pump to me is much nicer. I was having a tough time getting used to me T2 w/o p/s, but realised it was mostly under inflated tires. Once I aired them up, my steering effort is no more than 20% more than with p/s. To me no p/s gives you more feel of the road and lets you feel what your doing more. Sometimes its a bit harder to control, but otherwise its not bad at all. Save that money for a replacement pump and buy some other mods!
Old 12-11-06, 12:46 AM
  #3  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 19 Likes on 19 Posts
power steering pumps rarely fail unless you ran the car low on power steering fluid
Old 12-11-06, 01:17 AM
  #4  
Finally I have LSD

 
twistedriver's Avatar
 
Join Date: Jul 2003
Location: Los Angeles
Posts: 528
Likes: 0
Received 0 Likes on 0 Posts
Maybe try an aftermarket p/s cooler and make sure there is no kink in the lines to obstrut the pressure. A kink in the line would make the pump work harder then it needs too causing extra stress. Or maybe the old fluid got contaminated with metal from the last failed pump. Just some thoughts...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Th0m4s
Build Threads
25
02-26-19 02:04 AM
Queppa
New Member RX-7 Technical
8
09-02-18 09:53 AM
LunchboxCritter
2nd Generation Specific (1986-1992)
15
01-03-16 04:11 PM
alphawolff
1st Generation Specific (1979-1985)
17
11-17-15 05:57 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM



Quick Reply: Power Steering Pump Problem?



All times are GMT -5. The time now is 04:30 PM.