2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

power loss???????

Thread Tools
 
Search this Thread
 
Old Aug 23, 2002 | 01:33 AM
  #1  
forty4milesaway's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jun 2002
Posts: 193
Likes: 0
From: North Canton Ohio
Exclamation power loss???????

I put an engine w/ 3000mi. on it in my 91. I drove the first 500mi. following the break in procedure. Now at full throtle at about 6200 rpm i get a power loss. Its like the engine bogs down. I have tried it at about 65% throtle and it smooths out around 6700rpm then looses power again at 7000. Also my transmission is running very hot. It could burn if touched after being fun ofr about 15 mins. Is it normal ofr it to be that hot? because i dont remeber my 88 running that hot. Anyone have ne ideas. Anything will help. Thax.
Reply
Old Aug 23, 2002 | 01:41 AM
  #2  
13bpower's Avatar
s4 for life
Tenured Member 15 Years
 
Joined: May 2002
Posts: 2,516
Likes: 1
From: Oahu
Are you talking about your shifter warming up? Mine does that under normal driving conditions. Gets really hot.

As for the power loss...... Is it more than just being past the power band?
Reply
Old Aug 23, 2002 | 12:58 PM
  #3  
forty4milesaway's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jun 2002
Posts: 193
Likes: 0
From: North Canton Ohio
Ya my shifter gets very hot under normal conditions. As does my floor and center console. But i shouldnt be beyond the power band at 6200 rpm. Most the power should be made between 6000 and 8200rpm. And that is exactly the area where i have no power.
Reply
Old Aug 24, 2002 | 10:10 AM
  #4  
forty4milesaway's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jun 2002
Posts: 193
Likes: 0
From: North Canton Ohio
Ne one else have ne ideas. I need some help here.
Reply
Old Aug 24, 2002 | 12:08 PM
  #5  
Piranha's Avatar
what 7
 
Joined: Feb 2002
Posts: 670
Likes: 1
From: Portage, MI
Check your fuel injectors, have you had them professionally cleaned? My car stopped accelerating at 6K in 4th gear ('88 TII) when it should have blasted through there, I'm assuming not enough fuel.
Reply
Old Aug 25, 2002 | 10:45 AM
  #6  
forty4milesaway's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jun 2002
Posts: 193
Likes: 0
From: North Canton Ohio
I had the injectors blue printed by rc engineering. So they should be good still. Ne other ideas
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
High_Carb_Diet
Power FC Forum
1
Sep 5, 2015 09:07 AM




All times are GMT -5. The time now is 02:15 AM.