Post your sweet interior setup (gauges ect)
#1
Full Member
Thread Starter
Join Date: May 2003
Location: Tejas
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
Post your sweet interior setup (gauges ect)
Hey guys, just bored, and wanted to see some nicely done interior setups. Weither it be gauge and pods or whatever. I just want to see them. Thanks!
#2
Fok mi
Join Date: Sep 2002
Location: Sioux Falls, SD
Posts: 892
Likes: 0
Received 0 Likes
on
0 Posts
I still need to get a peice of plexi or al. and make my stereo surround.. I'll see if i can fit my Profec B and Turbo Timer with maybe a 60mm coolant gauge.. or it'll just be the TT and Profec B side by side under the cd player. think i'll get a DASH unit and ditch the hand controller some time too hehe
#3
zoom zoom go boom
I found that with an installation kit for the cd deck the unused space under the deck can be put to use with 2 to 3 smaller gauges. I only have 2 in there but i could have fit 3.
#4
Fok mi
Join Date: Sep 2002
Location: Sioux Falls, SD
Posts: 892
Likes: 0
Received 0 Likes
on
0 Posts
I don't want to put really important gauges that low.. like boost or what not.. i like to keep my eyes higher up when driving I'll get the p/h/w coolant so it just lights up if i'm in trouble
#5
zoom zoom go boom
I dont mind having to glance around for my gauges. When I get an a piller panel I can install my gauge pod and put two more there. I can mount my turbo timer...somewhere, when I get the harness. I think I'll make a panel to replace the center ac vents when I get an electronic boost controller. An I can just mount the Safc above that on top of the dash at a slight angle to make it accesible and easier to read from the driver's seat.
Thats my plan, for now.
Thats my plan, for now.
#6
Glock Lover
Join Date: Mar 2001
Location: Currently residing in St Charles, MO
Posts: 2,223
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by bl|nk
I still need to get a peice of plexi or al. and make my stereo surround.. I'll see if i can fit my Profec B and Turbo Timer with maybe a 60mm coolant gauge.. or it'll just be the TT and Profec B side by side under the cd player. think i'll get a DASH unit and ditch the hand controller some time too hehe
I still need to get a peice of plexi or al. and make my stereo surround.. I'll see if i can fit my Profec B and Turbo Timer with maybe a 60mm coolant gauge.. or it'll just be the TT and Profec B side by side under the cd player. think i'll get a DASH unit and ditch the hand controller some time too hehe
#7
Fok mi
Join Date: Sep 2002
Location: Sioux Falls, SD
Posts: 892
Likes: 0
Received 0 Likes
on
0 Posts
i was thinking about double siding it to the glove box... i honestly only look at it for the water temp.. and then to scroll my log min/max. my bad you said dash not hand controller haha
I figured if i had the Dash it'd go basically in front of the idiot lights
I figured if i had the Dash it'd go basically in front of the idiot lights
Trending Topics
#11
Senior Member
Join Date: Jun 2001
Location: Columbus, Ohio
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
I don't have pictures of mine right now, but I have the dual pod on the a pillar with my boost and egt, exactly like bl|nk, except that I have my boost in front of my egt. Same Greddy guages too.
I then put my Greddy a/f guage with my afc down where my ash tray used to be. I'll be putting my profec B in the din below my tv. See, the guy that installed all my tv/stereo/guages/TT/afc is a custom installer and he can work just about anything out of glass or whatever.
So I'm dumping the stock surround-the whole piece that surrounds the vents and deck, and he's custom fabricating one that will better fit my tv + profec and also my afc & a/f guage. He's also going to incorperate a power adapter for my ps2. It's setting me back about 200 bucks. Dude is awesome though. He did my custom kick panels, which are the best on earth. When it's all done, I'll drop some pics in for you guys.
-Kanaida
I then put my Greddy a/f guage with my afc down where my ash tray used to be. I'll be putting my profec B in the din below my tv. See, the guy that installed all my tv/stereo/guages/TT/afc is a custom installer and he can work just about anything out of glass or whatever.
So I'm dumping the stock surround-the whole piece that surrounds the vents and deck, and he's custom fabricating one that will better fit my tv + profec and also my afc & a/f guage. He's also going to incorperate a power adapter for my ps2. It's setting me back about 200 bucks. Dude is awesome though. He did my custom kick panels, which are the best on earth. When it's all done, I'll drop some pics in for you guys.
-Kanaida
Last edited by Kanaida; 05-10-03 at 11:11 AM.
#13
Ive got mine setup like big retards. Water temp, oil temp and oil pressure are going there. My boost gauge is sitting in the drivers demister grill until I go buy a pod lol. Although Im going to find a 3 gauge pod for the pillar, and put an electric fuel pressure, EGT and boost there.
#15
Fok mi
Join Date: Sep 2002
Location: Sioux Falls, SD
Posts: 892
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by dr0x
Ive got mine setup like big retards. Water temp, oil temp and oil pressure are going there. My boost gauge is sitting in the drivers demister grill until I go buy a pod lol. Although Im going to find a 3 gauge pod for the pillar, and put an electric fuel pressure, EGT and boost there.
Ive got mine setup like big retards. Water temp, oil temp and oil pressure are going there. My boost gauge is sitting in the drivers demister grill until I go buy a pod lol. Although Im going to find a 3 gauge pod for the pillar, and put an electric fuel pressure, EGT and boost there.
#16
Senior Member
Join Date: Jul 2002
Location: Largo, FL
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SonicRaT
I've got the same setup as everyone else. I want some mickey mouse ears for it, but I can't find them
I've got the same setup as everyone else. I want some mickey mouse ears for it, but I can't find them
The Border carbon fiber meter panel is available for either 52mm or 60mm gauges. Please note that the panel is made for a right hand drive car and it require very minor trimming on the edge that meets the windshield to match the contour of the left hand drive cars.
http://www.corksport.com/main.php3?p...3Fcat%3D214913
#24
NA Powah, Every Hour!
Join Date: Mar 2001
Location: Sacramento, CA, U S of A
Posts: 1,302
Likes: 0
Received 0 Likes
on
0 Posts
Yo,
Sorry, no extra gauges...yet!
I might be getting a 60mm GReddy EGT gauge at some point in time.
Kevin
1989 GTUs "Hit a buck twenty on the way to work..."
Sorry, no extra gauges...yet!
I might be getting a 60mm GReddy EGT gauge at some point in time.
Kevin
1989 GTUs "Hit a buck twenty on the way to work..."
#25
Senior Member
Join Date: Jun 2001
Location: Columbus, Ohio
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Hey Kevin, are those Sparco pedals as well? Those are hot! nice alluminum, and no brand name on the front. Those are sweet. How much and what manufacturer?
-Kanaida
-Kanaida